2021 Genesis GV80 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Genesis GV80, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2021 GV80 — Year-Specific Fitment Context
The 2021 model year marks the beginning of the Genesis GV80's 5x114.3 bolt pattern era, which continued through 2025 (5 consecutive years). Wheels from any 2021–2025 Genesis GV80 are cross-compatible with the 2021 model.
Genesis GV80 Bolt Pattern by Year
The table below shows how the GV80's wheel specifications have changed over the years. The 2021 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2021 Genesis GV80
For your 2021 Genesis GV80, the 5x114.3 bolt pattern is shared with 2021-2025 models, but the center bore is a critical 67.1mm. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset must stay within 35-50mm; deviating risks rubbing or poor handling. Always use lug nuts with the correct 12x1.5 thread pitch and a 60-degree conical seat (ball seat is incompatible). Failure to match seat type can cause wheel loosening. Verify lug nut length to avoid bottoming out or insufficient thread engagement.
Historical Fitment Data Reference
In our dataset, Genesis GV80 appears from 2021 to 2025 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving.
- ✅ Avoid using universal fit wheels without hub rings; even minor bore mismatch causes vibration.
- ✅ Check wheel clearance with brake calipers; some aftermarket designs may interfere with the GV80's large brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Genesis GV80 — Frequently Asked Questions
What is the bolt pattern for a 2021 Genesis GV80?
The 2021 Genesis GV80 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Genesis GV80 have the same bolt pattern as the 2021?
The Genesis GV80 uses the 5x114.3 pattern from 2021 through 2025. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2021 Genesis GV80?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 35-50mm offset mean for the 2021 GV80?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Genesis.
Do 2021 Genesis GV80s use lug bolts or lug nuts?
The 2021 GV80 requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the factory wheel offset for a 2021 Genesis GV80?
The OEM offset for the 2021 GV80 is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset