2016 Hyundai Genesis Coupe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Hyundai Genesis Coupe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2016 Genesis Coupe — Year-Specific Fitment Context
The 2016 model year is the final year of the Hyundai Genesis Coupe's 5x114.3 bolt pattern run (since 2010). Wheels from any 2010–2016 Hyundai Genesis Coupe are cross-compatible with the 2016 model.
Hyundai Genesis Coupe Bolt Pattern by Year
The table below shows how the Genesis Coupe's wheel specifications have changed over the years. The 2016 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2016 Hyundai Genesis Coupe
For your 2016 Hyundai Genesis Coupe, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The stock offset is 35mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree). Mismatched lug nuts can lead to wheel loosening. Verify that aftermarket wheels clear the brake calipers and suspension components. For staggered setups, maintain proper tire diameter ratios to avoid ABS/ESC errors.
Historical Fitment Data Reference
In our dataset, Hyundai Genesis Coupe appears from 2010 to 2016 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lb after 50 miles of driving.
- ✅ Avoid using universal fitment wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check inner clearance for aftermarket wheels; the front strut and rear fender are common interference points.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Hyundai Genesis Coupe — Frequently Asked Questions
What is the bolt pattern for a 2016 Hyundai Genesis Coupe?
The 2016 Hyundai Genesis Coupe uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35mm.
What other years of Hyundai Genesis Coupe have the same bolt pattern as the 2016?
The Hyundai Genesis Coupe uses the 5x114.3 pattern from 2010 through 2016. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Can I use spacers on my 2016 Hyundai Genesis Coupe?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What does 35mm offset mean for the 2016 Genesis Coupe?
An offset of 35mm means the wheel's mounting surface is 35mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Do 2016 Hyundai Genesis Coupes use lug bolts or lug nuts?
The 2016 Genesis Coupe requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2016 Hyundai Genesis Coupe use?
The 2016 Hyundai Genesis Coupe uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset