2013 Hyundai Genesis Coupe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Hyundai Genesis Coupe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2013 Genesis Coupe — Year-Specific Fitment Context
The 2013 Hyundai Genesis Coupe is in year 4 of 7 using the 5x114.3 pattern (2010–2016). Wheels from any 2010–2016 Hyundai Genesis Coupe are cross-compatible with the 2013 model.
Hyundai Genesis Coupe Bolt Pattern by Year
The table below shows how the Genesis Coupe's wheel specifications have changed over the years. The 2013 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2013 Hyundai Genesis Coupe
For your 2013 Hyundai Genesis Coupe, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset is sensitive; stock is around +35mm. Sticking close to this range maintains handling and prevents rubbing. A 5mm variance is acceptable, but extreme offsets may require fender rolling or suspension changes. Always use lug nuts with the correct thread pitch (12x1.50) and seat type: OEM uses conical (60-degree) seats. Using ball-seat or incorrect thread pitch nuts can cause wheel loosening or damage. Safety first: verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, Hyundai Genesis Coupe appears from 2010 to 2016 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check brake caliper clearance when changing offset; some aftermarket wheels may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Hyundai Genesis Coupe — Frequently Asked Questions
What is the bolt pattern for a 2013 Hyundai Genesis Coupe?
The 2013 Hyundai Genesis Coupe uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35mm.
What other years of Hyundai Genesis Coupe have the same bolt pattern as the 2013?
The Hyundai Genesis Coupe uses the 5x114.3 pattern from 2010 through 2016. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What lug nut size does the 2013 Hyundai Genesis Coupe use?
The 2013 Hyundai Genesis Coupe uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2013 Hyundai Genesis Coupes use lug bolts or lug nuts?
The 2013 Genesis Coupe requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2013 Hyundai Genesis Coupe?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the PCD for a 2013 Hyundai Genesis Coupe?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 Genesis Coupe, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset