2014 Hyundai Genesis Coupe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Hyundai Genesis Coupe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 Genesis Coupe — Year-Specific Fitment Context
The 2014 Hyundai Genesis Coupe is in year 5 of 7 using the 5x114.3 pattern (2010–2016). Wheels from any 2010–2016 Hyundai Genesis Coupe are cross-compatible with the 2014 model.
Hyundai Genesis Coupe Bolt Pattern by Year
The table below shows how the Genesis Coupe's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2014 Hyundai Genesis Coupe
When selecting wheels for your 2014 Hyundai Genesis Coupe, the 67.1mm center bore is critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibrations and ensure proper load distribution. Offset is sensitive: the factory spec is 35mm, but a range of 30-40mm is acceptable for most setups. Going beyond can cause rubbing or clearance issues. Always verify lug nut compatibility: the 12x1.50 thread pitch requires conical (60-degree) or ball-seat nuts; using incorrect seats can lead to wheel loss. For safety, re-torque after 50-100 miles and avoid mixing lug types.
Historical Fitment Data Reference
In our dataset, Hyundai Genesis Coupe appears from 2010 to 2016 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 67.1mm bore.
- ✅ Avoid spacers without extended studs; they can cause insufficient thread engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Hyundai Genesis Coupe — Frequently Asked Questions
What is the bolt pattern for a 2014 Hyundai Genesis Coupe?
The 2014 Hyundai Genesis Coupe uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35mm.
What other years of Hyundai Genesis Coupe have the same bolt pattern as the 2014?
The Hyundai Genesis Coupe uses the 5x114.3 pattern from 2010 through 2016. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What lug nut size does the 2014 Hyundai Genesis Coupe use?
The 2014 Hyundai Genesis Coupe uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2014 Hyundai?
The 2014 Genesis Coupe uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2014 Hyundai Genesis Coupe?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 Genesis Coupe, the PCD is 5x114.3.
What is the center bore of a 2014 Hyundai Genesis Coupe?
The factory center bore (hub bore) for the 2014 Hyundai Genesis Coupe is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset