2011 Hyundai Genesis Coupe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Hyundai Genesis Coupe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 Genesis Coupe — Year-Specific Fitment Context
The 2011 Hyundai Genesis Coupe is in year 2 of 7 using the 5x114.3 pattern (2010–2016). Wheels from any 2010–2016 Hyundai Genesis Coupe are cross-compatible with the 2011 model.
Hyundai Genesis Coupe Bolt Pattern by Year
The table below shows how the Genesis Coupe's wheel specifications have changed over the years. The 2011 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Hyundai Genesis Coupe
For your 2011 Hyundai Genesis Coupe, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 35mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use conical (60-degree) seats, while aftermarket wheels may require ball or tapered seats. Mismatched lug nuts can lead to wheel loosening. Verify lug nut engagement (minimum 6-8 full turns) and torque to 80-90 ft-lbs.
Historical Fitment Data Reference
In our dataset, Hyundai Genesis Coupe appears from 2010 to 2016 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel settling.
- ✅ Avoid using universal fit wheels without hub rings; they can cause vibration and stress on studs.
- ✅ Check inner clearance for aftermarket wheels; the Genesis Coupe has limited space near the strut and fender.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Hyundai Genesis Coupe — Frequently Asked Questions
What is the bolt pattern for a 2011 Hyundai Genesis Coupe?
The 2011 Hyundai Genesis Coupe uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35mm.
What other years of Hyundai Genesis Coupe have the same bolt pattern as the 2011?
The Hyundai Genesis Coupe uses the 5x114.3 pattern from 2010 through 2016. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Will wheels from another Hyundai fit my 2011 Genesis Coupe?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Do 2011 Hyundai Genesis Coupes use lug bolts or lug nuts?
The 2011 Genesis Coupe requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2011 Hyundai Genesis Coupe?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Genesis Coupe, the PCD is 5x114.3.
What is the center bore of a 2011 Hyundai Genesis Coupe?
The factory center bore (hub bore) for the 2011 Hyundai Genesis Coupe is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset