2025 MAZDA CX-90 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 MAZDA CX-90 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 80-87 ft-lbs (108-118 Nm).
2025 MAZDA CX-90 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80-87 ft-lbs (108-118 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 CX-90 — Year-Specific Fitment Context
The 2025 MAZDA CX-90 is in year 3 of 4 using the 5x114.3 pattern (2023–2026). Wheels from any 2023–2026 MAZDA CX-90 are cross-compatible with the 2025 model.
MAZDA CX-90 Bolt Pattern by Year
Looking for all generations? View the complete MAZDA CX-90 (2023–2026) Bolt Pattern & Generation Guide →
The table below shows how the CX-90's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 MAZDA CX-90 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 MAZDA CX-90, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Kia EV9 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2024 Kia Forte | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2016 Kia Forte Koup | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2018 Kia Forte5 | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Kia K4 | 67.1 mm (Exact) | 40-50 | 12x1.5 (Flat) |
| 2025 Kia K5 | 67.1 mm (Exact) | 45-50 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
| 2021 Maserati Quattroporte | 78.1 mm | 78.1mm → 67.1mm |
45 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80-87 ft-lbs (108-118 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 MAZDA CX-90 — Frequently Asked Questions
What is the bolt pattern for a 2025 MAZDA CX-90?
The 2025 MAZDA CX-90 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mm.
What other years of MAZDA CX-90 have the same bolt pattern as the 2025?
The MAZDA CX-90 uses the 5x114.3 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 MAZDA CX-90s use lug bolts or lug nuts?
The 2025 CX-90 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2025 MAZDA CX-90?
The factory center bore (hub bore) for the 2025 MAZDA CX-90 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 35-45mm offset mean for the 2025 CX-90?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
How do I measure the bolt pattern on my 2025 MAZDA?
The 2025 CX-90 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →