2026 MAZDA CX-90 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 MAZDA CX-90 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 80-87 ft-lbs (108-118 Nm).
2026 MAZDA CX-90 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80-87 ft-lbs (108-118 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 CX-90 — Year-Specific Fitment Context
The 2026 model year is the final year of the MAZDA CX-90's 5x114.3 bolt pattern run (since 2023). Wheels from any 2023–2026 MAZDA CX-90 are cross-compatible with the 2026 model.
MAZDA CX-90 Bolt Pattern by Year
Looking for all generations? View the complete MAZDA CX-90 (2023–2026) Bolt Pattern & Generation Guide →
The table below shows how the CX-90's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 MAZDA CX-90 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 MAZDA CX-90, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 MAZDA CX-70 | 67.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2023 MAZDA CX-9 | 67.1 mm (Exact) | 45-50 | 12x1.5 (Cone) |
| 2024 MAZDA CX-90 PHEV | 67.1 mm (Exact) | 45-50 | 12x1.5 (Cone) |
| 2025 MAZDA MAZDA3 | 67.1 mm (Exact) | 45-50 | 12x1.5 (Flat) |
| 2015 MAZDA MAZDA5 | 67.1 mm (Exact) | 52,5 | N 12x1.50 (Cone) |
| 2021 MAZDA MAZDA6 | 67.1 mm (Exact) | 45-50 | 12x1.5 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Mercury Grand Marquis | 70.5 mm | 70.5mm → 67.1mm |
0-40 |
| 2003 Mercury Sable | 70.5 mm | 70.5mm → 67.1mm |
40 |
| 2003 Pontiac Grand Prix | 70.3 mm | 70.3mm → 67.1mm |
52 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 67.1mm |
12 |
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80-87 ft-lbs (108-118 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 MAZDA CX-90 — Frequently Asked Questions
What is the bolt pattern for a 2026 MAZDA CX-90?
The 2026 MAZDA CX-90 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mm.
What other years of MAZDA CX-90 have the same bolt pattern as the 2026?
The MAZDA CX-90 uses the 5x114.3 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Why is matching the 67.1mm center bore important for the 2026 CX-90?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2026 MAZDA CX-90?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How do I measure the bolt pattern on my 2026 MAZDA?
The 2026 CX-90 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2026 MAZDA CX-90s use lug bolts or lug nuts?
The 2026 CX-90 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →