2024 MAZDA CX-90 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 MAZDA CX-90, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 CX-90 — Year-Specific Fitment Context
The 2024 model year is the final year of the MAZDA CX-90's 5x114.3 bolt pattern run (since 2023). Wheels from any 2023–2024 MAZDA CX-90 are cross-compatible with the 2024 model.
MAZDA CX-90 Bolt Pattern by Year
The table below shows how the CX-90's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2023 | 5x114.3 | 67.1 | 45-50 |
| ▸ 2024 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 MAZDA CX-90
When selecting aftermarket wheels for the 2024 MAZDA CX-90, the 67.1mm center bore is critical. Most aftermarket wheels have a larger bore (73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The offset range is tight: 45-50mm. Straying outside this can cause rubbing on struts or fenders. Always use 12x1.5 lug nuts with the correct seat type—either conical (60-degree) or ball seat, matching the wheel's design. Incorrect seating can lead to wheel loosening. Verify that the wheel's load rating meets or exceeds the CX-90's requirements. For a seamless fit, consider OEM wheels from 2023-2024 CX-90 models, which are direct bolt-on.
Historical Fitment Data Reference
In our dataset, MAZDA CX-90 appears from 2023 to 2024 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating and prevent loosening.
- ✅ Avoid using universal lug nuts; always match the seat type (conical or ball) to the wheel's design to prevent damage.
- ✅ Check for brake caliper clearance, especially with larger diameter wheels or aggressive offsets, as the CX-90 has large brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 MAZDA CX-90 — Frequently Asked Questions
What is the bolt pattern for a 2024 MAZDA CX-90?
The 2024 MAZDA CX-90 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA CX-90 have the same bolt pattern as the 2024?
The MAZDA CX-90 uses the 5x114.3 pattern from 2023 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Can I use spacers on my 2024 MAZDA CX-90?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How tight should I torque the lug nuts on a 2024 MAZDA CX-90?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2024 MAZDA?
The 2024 CX-90 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 45-50mm offset mean for the 2024 CX-90?
An offset of 45-50mm means the wheel's mounting surface is 45-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset