2025 Kia K4 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Kia K4 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 40-50, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79-94 ft-lbs (107-127 Nm).
2025 Kia K4 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 40-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79-94 ft-lbs (107-127 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 K4 — Year-Specific Fitment Context
The 2025 model year marks the beginning of the Kia K4's 5x114.3 bolt pattern era, which continued through 2026 (2 consecutive years). Wheels from any 2025–2026 Kia K4 are cross-compatible with the 2025 model.
Kia K4 Bolt Pattern by Year
Looking for all generations? View the complete Kia K4 (2025–2026) Bolt Pattern & Generation Guide →
The table below shows how the K4's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2025 | 5x114.3 | 67.1 | 40-50 |
| 2026 | 5x114.3 | 67.1 | 40-50 |
2025 Kia K4 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Kia K4, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Maserati Grancabrio | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Maserati GranTurismo | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2024 Maserati Levante | 67.1 mm (Exact) | 45 | 14x1.5 (Cone) |
| 2025 Maserati MC20 | 67.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2008 MAZDA B-Series Extended Cab | 67.1 mm (Exact) | 45-50 | 12x1.5 (Cone) |
| 2008 MAZDA B-Series Regular Cab | 67.1 mm (Exact) | 45-50 | 12x1.5 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2021 Maserati Quattroporte | 78.1 mm | 78.1mm → 67.1mm |
45 |
| 1994 Mercury Grand Marquis | 70.5 mm | 70.5mm → 67.1mm |
0-40 |
| 2003 Mercury Sable | 70.5 mm | 70.5mm → 67.1mm |
40 |
| 2003 Pontiac Grand Prix | 70.3 mm | 70.3mm → 67.1mm |
52 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 67.1mm |
12 |
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79-94 ft-lbs (107-127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Kia K4 — Frequently Asked Questions
What is the bolt pattern for a 2025 Kia K4?
The 2025 Kia K4 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 40-50mm.
What other years of Kia K4 have the same bolt pattern as the 2025?
The Kia K4 uses the 5x114.3 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2025 Kia K4?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2025 Kia K4 use?
The 2025 Kia K4 uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2025 Kia K4?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 2025 Kia K4?
The OEM offset for the 2025 K4 is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →