2025 Maserati MC20 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Maserati MC20 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).
2025 Maserati MC20 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 76 ft-lbs (103 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 MC20 — Year-Specific Fitment Context
The 2025 Maserati MC20 is in year 4 of 5 using the 5x114.3 pattern (2022–2026). Wheels from any 2022–2026 Maserati MC20 are cross-compatible with the 2025 model.
Maserati MC20 Bolt Pattern by Year
Looking for all generations? View the complete Maserati MC20 (2022–2026) Bolt Pattern & Generation Guide →
The table below shows how the MC20's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Maserati MC20 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Maserati MC20, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2000 Dodge Stratus | 67.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2025 Ferrari 12Cilindri | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2025 Ferrari 296 | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2022 Ferrari 296 GTB | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2015 Ferrari 458 Italia | 67.1 mm (Exact) | 45 front, 58 rear | N 14x1.50 (Ball) |
| 2015 Ferrari 458 Speciale | 67.1 mm (Exact) | 45 front, 48 rear | N 14x1.50 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1993 Chrysler New Yorker | 71.6 mm | 71.6mm → 67.1mm |
40 |
| 2003 Dodge Caravan Cargo | 71.6 mm | 71.6mm → 67.1mm |
40 |
| 1998 Dodge Caravan Passenger | 71.6 mm | 71.6mm → 67.1mm |
40 |
| 2023 Dodge Challenger | 71.5 mm | 71.5mm → 67.1mm |
24 |
| 2015 Dodge Charger | 71.5 mm | 71.5mm → 67.1mm |
18 |
| 1995 Dodge Grand Caravan Passenger | 71.6 mm | 71.6mm → 67.1mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Maserati MC20 — Frequently Asked Questions
What is the bolt pattern for a 2025 Maserati MC20?
The 2025 Maserati MC20 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mm.
What other years of Maserati MC20 have the same bolt pattern as the 2025?
The Maserati MC20 uses the 5x114.3 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 Maserati MC20s use lug bolts or lug nuts?
The 2025 MC20 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Maserati fit my 2025 MC20?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I put aftermarket wheels on my 2025 Maserati MC20?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 67.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2025 Maserati MC20?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →