2024 Maserati MC20 Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Maserati MC20 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Cone seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).

2024 Maserati MC20 Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 67.1 mm
Offset Range (ET) 35-45
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Conical 60° (Cone / Tapered)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 76 ft-lbs (103 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2024 MC20 — Year-Specific Fitment Context

The 2024 Maserati MC20 is in year 3 of 5 using the 5x114.3 pattern (2022–2026). Wheels from any 2022–2026 Maserati MC20 are cross-compatible with the 2024 model.

Maserati MC20 Bolt Pattern by Year

Looking for all generations? View the complete Maserati MC20 (2022–2026) Bolt Pattern & Generation Guide →

The table below shows how the MC20's wheel specifications have changed over the years. The 2024 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2022 5x114.3 67.1 45
▸ 2024 5x114.3 67.1 35-45
2025 5x114.3 67.1 35-45
2026 5x114.3 67.1 35-45

2024 Maserati MC20 Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2024 Maserati MC20, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Aston Martin DB11 67.1 mm (Exact) 35-45mm 14x1.5 (Ball)
2008 Aston Martin Vantage 67.1 mm (Exact) 50 B 14x2.00 (Cone)
2010 Dodge Avenger 67.1 mm (Exact) 42 N 12x1.50 (Cone)
2000 Dodge Stratus 67.1 mm (Exact) 41 N 12x1.50 (Cone)
2025 Ferrari 12Cilindri 67.1 mm (Exact) Not Applicable 14x1.5 (Ball)
2025 Ferrari 296 67.1 mm (Exact) Not Applicable 14x1.5 (Ball)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2003 Pontiac Grand Prix 70.3 mm 70.3mm → 67.1mm 52
2002 Toyota 4Runner 106.1 mm 106.1mm → 67.1mm 12
2015 Aston Martin DB9 68.1 mm 68.1mm → 67.1mm 35-45mm
2016 Aston Martin DB9 GT 68.1 mm 68.1mm → 67.1mm 35-45mm
2021 Aston Martin DBS Superleggera 68.1 mm 68.1mm → 67.1mm 35-45mm
2025 Aston Martin DBX 68.1 mm 68.1mm → 67.1mm 35-45mm
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2024 Maserati MC20 — Frequently Asked Questions

What is the bolt pattern for a 2024 Maserati MC20?

The 2024 Maserati MC20 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-45mm.

What other years of Maserati MC20 have the same bolt pattern as the 2024?

The Maserati MC20 uses the 5x114.3 pattern from 2022 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.

What is the center bore of a 2024 Maserati MC20?

The factory center bore (hub bore) for the 2024 Maserati MC20 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

How tight should I torque the lug nuts on a 2024 Maserati MC20?

Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the PCD for a 2024 Maserati MC20?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 MC20, the PCD is 5x114.3.

What does 35-45mm offset mean for the 2024 MC20?

An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Maserati.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Maserati MC20 By Year

2022 2024 2025 2026

Other Maserati Models

Coupe Ghibli GranSport GranTurismo Grancabrio Grecale Levante MC20 Quattroporte

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)