2025 Kia Niro Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Kia Niro is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45-50, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79-94 ft-lbs (107-127 Nm).
2025 Kia Niro Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 45-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79-94 ft-lbs (107-127 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Niro — Year-Specific Fitment Context
The 2025 Kia Niro is in year 9 of 10 using the 5x114.3 pattern (2017–2026). Wheels from any 2017–2026 Kia Niro are cross-compatible with the 2025 model.
Kia Niro Bolt Pattern by Year
Looking for all generations? View the complete Kia Niro (2017–2026) Bolt Pattern & Generation Guide →
The table below shows how the Niro's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Kia Niro Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Kia Niro, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 McLaren GTS | 67.1 mm (Exact) | Front: +55mm, Rear: +48mm | 14x1.5 (Ball) |
| 2025 Mitsubishi Eclipse Cross | 67.1 mm (Exact) | 40-46 | 12x1.5 (Flat) |
| 2006 Mitsubishi Galant | 67.1 mm (Exact) | 38-46 | 12x1.5 (Cone) |
| 2007 Mitsubishi Lancer | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2015 Mitsubishi Lancer Evolution | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2025 Mitsubishi Outlander | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Mercury Grand Marquis | 70.5 mm | 70.5mm → 67.1mm |
0-40 |
| 2003 Mercury Sable | 70.5 mm | 70.5mm → 67.1mm |
40 |
| 2003 Pontiac Grand Prix | 70.3 mm | 70.3mm → 67.1mm |
52 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 67.1mm |
12 |
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79-94 ft-lbs (107-127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Kia Niro — Frequently Asked Questions
What is the bolt pattern for a 2025 Kia Niro?
The 2025 Kia Niro uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of Kia Niro have the same bolt pattern as the 2025?
The Kia Niro uses the 5x114.3 pattern from 2017 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the factory wheel offset for a 2025 Kia Niro?
The OEM offset for the 2025 Niro is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2025 Kia Niro?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Do 2025 Kia Niros use lug bolts or lug nuts?
The 2025 Niro requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Kia fit my 2025 Niro?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →