2020 Kia Niro Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Kia Niro, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Niro — Year-Specific Fitment Context
The 2020 Kia Niro is in year 4 of 8 using the 5x114.3 pattern (2017–2024). Wheels from any 2017–2024 Kia Niro are cross-compatible with the 2020 model.
Kia Niro Bolt Pattern by Year
The table below shows how the Niro's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Kia Niro
For the 2020 Kia Niro, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels must have a bore ≥67.1mm; use hub-centric rings to prevent vibration. Offset must stay within 35-50mm to avoid rubbing or suspension damage. Always use 12x1.5 lug nuts with the correct seat type (conical 60-degree for most aftermarket wheels; OEM uses ball seat). Never mix seat types—this can cause wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Kia Niro appears from 2017 to 2024 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 35mm; they may rub the strut or fender.
- ✅ If using aftermarket wheels, verify the center bore and use hub-centric rings if needed.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Kia Niro — Frequently Asked Questions
What is the bolt pattern for a 2020 Kia Niro?
The 2020 Kia Niro uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Niro have the same bolt pattern as the 2020?
The Kia Niro uses the 5x114.3 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Do 2020 Kia Niros use lug bolts or lug nuts?
The 2020 Niro requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2020 Kia Niro?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Niro, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2020 Kia Niro?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2020 Kia?
The 2020 Niro uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset