2025 McLaren GTS Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2025 McLaren GTS is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of Front: +55mm, Rear: +48mm, and utilizes 14x1.5 (Ball seat, 21mm hex) fasteners tightened to 140 Nm (103 lb-ft).

2025 McLaren GTS Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 67.1 mm
Offset Range (ET) Front: +55mm, Rear: +48mm
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Radius / Spherical (Ball Seat)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 140 Nm (103 lb-ft)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2025 GTS — Year-Specific Fitment Context

The 2025 model year marks the beginning of the McLaren GTS's 5x114.3 bolt pattern era, which continued through 2026 (2 consecutive years). Wheels from any 2025–2026 McLaren GTS are cross-compatible with the 2025 model.

McLaren GTS Bolt Pattern by Year

Looking for all generations? View the complete McLaren GTS (2025–2026) Bolt Pattern & Generation Guide →

The table below shows how the GTS's wheel specifications have changed over the years. The 2025 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 2025 5x114.3 67.1 Front: +55mm, Rear: +48mm
2026 5x114.3 67.1 Front: +55mm, Rear: +48mm

2025 McLaren GTS Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 McLaren GTS, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Aston Martin DB11 67.1 mm (Exact) 35-45mm 14x1.5 (Ball)
2010 Dodge Avenger 67.1 mm (Exact) 42 N 12x1.50 (Cone)
2000 Dodge Stratus 67.1 mm (Exact) 41 N 12x1.50 (Cone)
2025 Ferrari 12Cilindri 67.1 mm (Exact) Not Applicable 14x1.5 (Ball)
2025 Ferrari 296 67.1 mm (Exact) Not Applicable 14x1.5 (Ball)
2022 Ferrari 296 GTB 67.1 mm (Exact) 45 14x1.5 (Ball)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2015 Aston Martin DB9 68.1 mm 68.1mm → 67.1mm 35-45mm
2016 Aston Martin DB9 GT 68.1 mm 68.1mm → 67.1mm 35-45mm
2021 Aston Martin DBS Superleggera 68.1 mm 68.1mm → 67.1mm 35-45mm
2025 Aston Martin DBX 68.1 mm 68.1mm → 67.1mm 35-45mm
2018 Aston Martin Vanquish S 68.1 mm 68.1mm → 67.1mm 35-45mm
1993 Chrysler New Yorker 71.6 mm 71.6mm → 67.1mm 40
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2025 McLaren GTS — Frequently Asked Questions

What is the bolt pattern for a 2025 McLaren GTS?

The 2025 McLaren GTS uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is Front: +55mm, Rear: +48mmmm.

What other years of McLaren GTS have the same bolt pattern as the 2025?

The McLaren GTS uses the 5x114.3 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.

What lug nut size does the 2025 McLaren GTS use?

The 2025 McLaren GTS uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

What is the factory wheel offset for a 2025 McLaren GTS?

The OEM offset for the 2025 GTS is typically around Front: +55mm, Rear: +48mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What is the center bore of a 2025 McLaren GTS?

The factory center bore (hub bore) for the 2025 McLaren GTS is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Can I use spacers on my 2025 McLaren GTS?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

McLaren GTS By Year

2025 2026

Other McLaren Models

570GT 570S 600LT 650S 675LT 720S 750S Artura GTS MP4-12C

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)