2026 McLaren GTS Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 McLaren GTS is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of Front: +55mm, Rear: +48mm, and utilizes 14x1.5 (Ball seat, 21mm hex) fasteners tightened to 140 Nm (103 lb-ft).

2026 McLaren GTS Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 67.1 mm
Offset Range (ET) Front: +55mm, Rear: +48mm
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Radius / Spherical (Ball Seat)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 140 Nm (103 lb-ft)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 GTS — Year-Specific Fitment Context

The 2026 model year is the final year of the McLaren GTS's 5x114.3 bolt pattern run (since 2025). Wheels from any 2025–2026 McLaren GTS are cross-compatible with the 2026 model.

McLaren GTS Bolt Pattern by Year

Looking for all generations? View the complete McLaren GTS (2025–2026) Bolt Pattern & Generation Guide →

The table below shows how the GTS's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2025 5x114.3 67.1 Front: +55mm, Rear: +48mm
▸ 2026 5x114.3 67.1 Front: +55mm, Rear: +48mm

2026 McLaren GTS Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 McLaren GTS, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2025 Ferrari SF90 67.1 mm (Exact) 45 14x1.5 (Ball)
1994 Ford Probe 67.1 mm (Exact) 40 N 12x1.50 (Cone)
2025 Genesis Electrified G80 67.1 mm (Exact) 35-50 12x1.5 (Ball)
2024 Genesis Electrified GV70 67.1 mm (Exact) 35-50 12x1.5 (Cone)
2025 Genesis G70 67.1 mm (Exact) 34-44 12x1.5 (Ball)
2025 Genesis G80 67.1 mm (Exact) 35-50 12x1.5 (Ball)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
1994 Ford Explorer 87.1 mm 87.1mm → 67.1mm 44
1993 Ford Mustang 70.3 mm 70.3mm → 67.1mm 30
2025 Ford Mustang GTD 70.5 mm 70.5mm → 67.1mm Not Applicable
1994 Ford Ranger Regular Cab 70.3 mm 70.3mm → 67.1mm 12-20
1996 Ford Ranger SuperCab 70.3 mm 70.3mm → 67.1mm 12-20
1997 Jeep Wrangler 71.6 mm 71.6mm → 67.1mm 25
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 McLaren GTS — Frequently Asked Questions

What is the bolt pattern for a 2026 McLaren GTS?

The 2026 McLaren GTS uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is Front: +55mm, Rear: +48mmmm.

What other years of McLaren GTS have the same bolt pattern as the 2026?

The McLaren GTS uses the 5x114.3 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

What lug nut size does the 2026 McLaren GTS use?

The 2026 McLaren GTS uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

How tight should I torque the lug nuts on a 2026 McLaren GTS?

Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What does Front: +55mm, Rear: +48mmmm offset mean for the 2026 GTS?

An offset of Front: +55mm, Rear: +48mmmm means the wheel's mounting surface is Front: +55mm, Rear: +48mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your McLaren.

Will wheels from another McLaren fit my 2026 GTS?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

McLaren GTS By Year

2025 2026

Other McLaren Models

570GT 570S 600LT 650S 675LT 720S 750S Artura GTS MP4-12C

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)