2025 Kia K5 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Kia K5 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45-50, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79-94 ft-lbs (107-127 Nm).
2025 Kia K5 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 45-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79-94 ft-lbs (107-127 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 K5 — Year-Specific Fitment Context
The 2025 Kia K5 is in year 5 of 6 using the 5x114.3 pattern (2021–2026). Wheels from any 2021–2026 Kia K5 are cross-compatible with the 2025 model.
Kia K5 Bolt Pattern by Year
Looking for all generations? View the complete Kia K5 (2021–2026) Bolt Pattern & Generation Guide →
The table below shows how the K5's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Kia K5 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Kia K5, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Aston Martin DB11 | 67.1 mm (Exact) | 35-45mm | 14x1.5 (Ball) |
| 2008 Aston Martin Vantage | 67.1 mm (Exact) | 50 | B 14x2.00 (Cone) |
| 2010 Dodge Avenger | 67.1 mm (Exact) | 42 | N 12x1.50 (Cone) |
| 2000 Dodge Stratus | 67.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2025 Ferrari 12Cilindri | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2025 Ferrari 296 | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2021 Aston Martin DBS Superleggera | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2025 Aston Martin DBX | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2018 Aston Martin Vanquish S | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 1993 Chrysler New Yorker | 71.6 mm | 71.6mm → 67.1mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79-94 ft-lbs (107-127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Kia K5 — Frequently Asked Questions
What is the bolt pattern for a 2025 Kia K5?
The 2025 Kia K5 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of Kia K5 have the same bolt pattern as the 2025?
The Kia K5 uses the 5x114.3 pattern from 2021 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the factory wheel offset for a 2025 Kia K5?
The OEM offset for the 2025 K5 is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2025 Kia K5?
The factory center bore (hub bore) for the 2025 Kia K5 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2025 Kia K5 use?
The 2025 Kia K5 uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2025 Kia K5?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 K5, the PCD is 5x114.3.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →