2026 Kia K5 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Kia K5 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45-50, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79-94 ft-lbs (107-127 Nm).
2026 Kia K5 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 45-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79-94 ft-lbs (107-127 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 K5 — Year-Specific Fitment Context
The 2026 model year is the final year of the Kia K5's 5x114.3 bolt pattern run (since 2021). Wheels from any 2021–2026 Kia K5 are cross-compatible with the 2026 model.
Kia K5 Bolt Pattern by Year
Looking for all generations? View the complete Kia K5 (2021–2026) Bolt Pattern & Generation Guide →
The table below shows how the K5's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Kia K5 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Kia K5, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2017 Jeep Patriot | 67.1 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 2020 Kia Cadenza | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Kia Carnival | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Kia EV6 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Kia EV9 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2024 Kia Forte | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
| 2018 Lotus Evora 400 | 68.1 mm | 68.1mm → 67.1mm |
52 front, 69 rear |
| 2021 Lotus Evora GT | 68.0 mm | 68.0mm → 67.1mm |
50-60mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79-94 ft-lbs (107-127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Kia K5 — Frequently Asked Questions
What is the bolt pattern for a 2026 Kia K5?
The 2026 Kia K5 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of Kia K5 have the same bolt pattern as the 2026?
The Kia K5 uses the 5x114.3 pattern from 2021 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What does 45-50mm offset mean for the 2026 K5?
An offset of 45-50mm means the wheel's mounting surface is 45-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Kia.
How tight should I torque the lug nuts on a 2026 Kia K5?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2026 Kia K5?
The OEM offset for the 2026 K5 is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2026 Kia K5?
The factory center bore (hub bore) for the 2026 Kia K5 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →