2019 MAZDA MAZDA3 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 MAZDA MAZDA3, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 MAZDA3 — Year-Specific Fitment Context
The 2019 MAZDA MAZDA3 is in year 16 of 21 using the 5x114.3 pattern (2004–2024). Wheels from any 2004–2024 MAZDA MAZDA3 are cross-compatible with the 2019 model.
MAZDA MAZDA3 Bolt Pattern by Year
The table below shows how the MAZDA3's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 5x114.3 | 67.1 | 52,5 |
| 2005 | 5x114.3 | 67.1 | 52,5 |
| 2006 | 5x114.3 | 67.1 | 52,5 |
| 2007 | 5x114.3 | 67.1 | 52,5 |
| 2008 | 5x114.3 | 67.1 | 52,5 |
| 2009 | 5x114.3 | 67.1 | 52,5 |
| 2010 | 5x114.3 | 67.1 | 52,5 |
| 2011 | 5x114.3 | 67.1 | 52,5 |
| 2012 | 5x114.3 | 67.1 | 52,5 |
| 2013 | 5x114.3 | 67.1 | 52,5 |
| 2014 | 5x114.3 | 67.1 | 52,5 |
| 2015 | 5x114.3 | 67.1 | 52,5 |
| 2016 | 5x114.3 | 67.1 | 52,5 |
| 2017 | 5x114.3 | 67.1 | 52,5 |
| 2018 | 5x114.3 | 67.1 | 45-50 |
| ▸ 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
| 2022 | 5x114.3 | 67.1 | 45-50 |
| 2023 | 5x114.3 | 67.1 | 45-50 |
| 2024 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 MAZDA MAZDA3
The 2019 Mazda Mazda3 uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The recommended offset range is 45-50mm; deviating can cause rubbing or premature bearing wear. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat, while aftermarket may require ball or conical seats. Improper lug nut selection can lead to wheel detachment. Verify that aftermarket wheels clear the brake calipers and suspension components, especially with lower offsets.
Historical Fitment Data Reference
In our dataset, MAZDA MAZDA3 appears from 2004 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 102.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ For lowered cars, check inner clearance with the strut; offsets near 45mm may require spacers or camber adjustment.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 MAZDA MAZDA3 — Frequently Asked Questions
What is the bolt pattern for a 2019 MAZDA MAZDA3?
The 2019 MAZDA MAZDA3 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA MAZDA3 have the same bolt pattern as the 2019?
The MAZDA MAZDA3 uses the 5x114.3 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the PCD for a 2019 MAZDA MAZDA3?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 MAZDA3, the PCD is 5x114.3.
How tight should I torque the lug nuts on a 2019 MAZDA MAZDA3?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2019 MAZDA MAZDA3 use?
The 2019 MAZDA MAZDA3 uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2019 MAZDA MAZDA3?
The OEM offset for the 2019 MAZDA3 is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset