2018 MAZDA MAZDA3 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 MAZDA MAZDA3, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 MAZDA3 — Year-Specific Fitment Context
The 2018 MAZDA MAZDA3 is in year 15 of 21 using the 5x114.3 pattern (2004–2024). Wheels from any 2004–2024 MAZDA MAZDA3 are cross-compatible with the 2018 model.
MAZDA MAZDA3 Bolt Pattern by Year
The table below shows how the MAZDA3's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 5x114.3 | 67.1 | 52,5 |
| 2005 | 5x114.3 | 67.1 | 52,5 |
| 2006 | 5x114.3 | 67.1 | 52,5 |
| 2007 | 5x114.3 | 67.1 | 52,5 |
| 2008 | 5x114.3 | 67.1 | 52,5 |
| 2009 | 5x114.3 | 67.1 | 52,5 |
| 2010 | 5x114.3 | 67.1 | 52,5 |
| 2011 | 5x114.3 | 67.1 | 52,5 |
| 2012 | 5x114.3 | 67.1 | 52,5 |
| 2013 | 5x114.3 | 67.1 | 52,5 |
| 2014 | 5x114.3 | 67.1 | 52,5 |
| 2015 | 5x114.3 | 67.1 | 52,5 |
| 2016 | 5x114.3 | 67.1 | 52,5 |
| 2017 | 5x114.3 | 67.1 | 52,5 |
| ▸ 2018 | 5x114.3 | 67.1 | 45-50 |
| 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
| 2022 | 5x114.3 | 67.1 | 45-50 |
| 2023 | 5x114.3 | 67.1 | 45-50 |
| 2024 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 MAZDA MAZDA3
When selecting aftermarket wheels for your 2018 Mazda Mazda3, the 67.1mm center bore is critical. Most aftermarket wheels have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is tight: 45-50mm. Straying outside this range can cause rubbing on struts or fenders, or alter handling. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) or ball seat, matching the wheel's seat type. Never use incorrect lug nuts—they can loosen or damage the wheel. Verify clearance with the brake calipers and suspension before final installation.
Historical Fitment Data Reference
In our dataset, MAZDA MAZDA3 appears from 2004 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 102.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings to match the 67.1mm bore; plastic rings are fine for street use.
- ✅ Check that the wheel's load rating exceeds the vehicle's gross axle weight rating (GAWR) for safety.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 MAZDA MAZDA3 — Frequently Asked Questions
What is the bolt pattern for a 2018 MAZDA MAZDA3?
The 2018 MAZDA MAZDA3 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA MAZDA3 have the same bolt pattern as the 2018?
The MAZDA MAZDA3 uses the 5x114.3 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2018 MAZDA MAZDA3?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2018 MAZDA MAZDA3?
The factory center bore (hub bore) for the 2018 MAZDA MAZDA3 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2018 MAZDA MAZDA3?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Do 2018 MAZDA MAZDA3s use lug bolts or lug nuts?
The 2018 MAZDA3 requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset