2018 Hyundai Santa Fe Sport Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Hyundai Santa Fe Sport, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Santa Fe Sport — Year-Specific Fitment Context
The 2018 model year is the final year of the Hyundai Santa Fe Sport's 5x114.3 bolt pattern run (since 2013). Wheels from any 2013–2018 Hyundai Santa Fe Sport are cross-compatible with the 2018 model.
Hyundai Santa Fe Sport Bolt Pattern by Year
The table below shows how the Santa Fe Sport's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Hyundai Santa Fe Sport
For your 2018 Hyundai Santa Fe Sport, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 35-50mm; deviating can cause rubbing or poor handling. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque after 50-100 miles. Note: 2013-2018 Santa Fe Sport wheels are cross-compatible.
Historical Fitment Data Reference
In our dataset, Hyundai Santa Fe Sport appears from 2013 to 2018 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings.
- ✅ Check that aftermarket wheels have sufficient clearance for brake calipers, especially on AWD models.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Hyundai Santa Fe Sport — Frequently Asked Questions
What is the bolt pattern for a 2018 Hyundai Santa Fe Sport?
The 2018 Hyundai Santa Fe Sport uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Santa Fe Sport have the same bolt pattern as the 2018?
The Hyundai Santa Fe Sport uses the 5x114.3 pattern from 2013 through 2018. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Will wheels from another Hyundai fit my 2018 Santa Fe Sport?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Why is matching the 67.1mm center bore important for the 2018 Santa Fe Sport?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2018 Hyundai Santa Fe Sport?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
Do 2018 Hyundai Santa Fe Sports use lug bolts or lug nuts?
The 2018 Santa Fe Sport requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset