2025 Hyundai Kona Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Hyundai Kona is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45-50, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79-94 ft-lbs (107-127 Nm).

2025 Hyundai Kona Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 67.1 mm
Offset Range (ET) 45-50
Thread Size (Lug Nut / Bolt) 12x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 79-94 ft-lbs (107-127 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2025 Kona — Year-Specific Fitment Context

The 2025 Hyundai Kona is in year 8 of 9 using the 5x114.3 pattern (2018–2026). Wheels from any 2018–2026 Hyundai Kona are cross-compatible with the 2025 model.

Hyundai Kona Bolt Pattern by Year

Looking for all generations? View the complete Hyundai Kona (2018–2026) Bolt Pattern & Generation Guide →

The table below shows how the Kona's wheel specifications have changed over the years. The 2025 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2018 5x114.3 67.1 49
2019 5x114.3 67.1 49
2020 5x114.3 67.1 49
2021 5x114.3 67.1 35-50
2022 5x114.3 67.1 35-50
2023 5x114.3 67.1 35-50
2024 5x114.3 67.1 35-50
▸ 2025 5x114.3 67.1 45-50
2026 5x114.3 67.1 45-50

2025 Hyundai Kona Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Hyundai Kona, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
1994 Ford Probe 67.1 mm (Exact) 40 N 12x1.50 (Cone)
2025 Genesis Electrified G80 67.1 mm (Exact) 35-50 12x1.5 (Ball)
2024 Genesis Electrified GV70 67.1 mm (Exact) 35-50 12x1.5 (Cone)
2025 Genesis G70 67.1 mm (Exact) 34-44 12x1.5 (Ball)
2025 Genesis G80 67.1 mm (Exact) 35-50 12x1.5 (Ball)
2025 Genesis G90 67.1 mm (Exact) 35-45 12x1.5 (Ball)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
1994 Ford Explorer 87.1 mm 87.1mm → 67.1mm 44
1993 Ford Mustang 70.3 mm 70.3mm → 67.1mm 30
2025 Ford Mustang GTD 70.5 mm 70.5mm → 67.1mm Not Applicable
1994 Ford Ranger Regular Cab 70.3 mm 70.3mm → 67.1mm 12-20
1996 Ford Ranger SuperCab 70.3 mm 70.3mm → 67.1mm 12-20
1997 Jeep Wrangler 71.6 mm 71.6mm → 67.1mm 25
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2025 Hyundai Kona — Frequently Asked Questions

What is the bolt pattern for a 2025 Hyundai Kona?

The 2025 Hyundai Kona uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.

What other years of Hyundai Kona have the same bolt pattern as the 2025?

The Hyundai Kona uses the 5x114.3 pattern from 2018 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.

What is the factory wheel offset for a 2025 Hyundai Kona?

The OEM offset for the 2025 Kona is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What is the PCD for a 2025 Hyundai Kona?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 Kona, the PCD is 5x114.3.

Can I use spacers on my 2025 Hyundai Kona?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.

What does 45-50mm offset mean for the 2025 Kona?

An offset of 45-50mm means the wheel's mounting surface is 45-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Hyundai Kona By Year

2018 2019 2020 2021 2022 2023 2024 2025 2026

Other Hyundai Models

Azera Elantra GT Elantra Hybrid Equus IONIQ 5 Ioniq 5 N Ioniq Electric Ioniq Hybrid Ioniq Plug-in Hybrid Kona Kona Electric Kona N Palisade Santa Cruz Santa Fe Hybrid Scoupe Tucson Tucson Hybrid Tucson Plug-in Hybrid XG350

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)