2018 Hyundai Kona Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Hyundai Kona, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size M 12x1.50
Center Bore (CB) 67.1 mm
Offset (ET) 49
Torque Specs 80 ft-lbs (108 Nm)

2018 Kona — Year-Specific Fitment Context

The 2018 model year marks the beginning of the Hyundai Kona's 5x114.3 bolt pattern era, which continued through 2024 (7 consecutive years). Wheels from any 2018–2024 Hyundai Kona are cross-compatible with the 2018 model.

Hyundai Kona Bolt Pattern by Year

The table below shows how the Kona's wheel specifications have changed over the years. The 2018 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 2018 5x114.3 67.1 49
2019 5x114.3 67.1 49
2020 5x114.3 67.1 49
2021 5x114.3 67.1 35-50
2022 5x114.3 67.1 35-50
2023 5x114.3 67.1 35-50
2024 5x114.3 67.1 35-50

Fitment Notes

The 2018 Hyundai Kona has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Hyundai Kona appears from 2018 to 2024 (7 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2018 Hyundai Kona — Frequently Asked Questions

What is the bolt pattern for a 2018 Hyundai Kona?

The 2018 Hyundai Kona uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 49mm.

What other years of Hyundai Kona have the same bolt pattern as the 2018?

The Hyundai Kona uses the 5x114.3 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.

Will wheels from another Hyundai fit my 2018 Kona?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.

Can I use spacers on my 2018 Hyundai Kona?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your M 12x1.50 hardware.

Do 2018 Hyundai Konas use lug bolts or lug nuts?

The 2018 Kona requires M 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

Can I put aftermarket wheels on my 2018 Hyundai Kona?

Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 49mm, and a center bore of at least 67.1mm (using hub rings if larger).

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Hyundai Kona is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2018 Hyundai Kona, please report it via our About page contact so we can verify and update this record.

Hyundai Kona By Year

2018 2019 2020 2021 2022 2023 2024

Other Hyundai Models

Azera Elantra N Genesis Genesis Coupe IONIQ 5 IONIQ 7 Ioniq Electric Santa Cruz Santa Fe Santa Fe Plug-in Hybrid Scoupe Sonata Tiburon Tucson Tucson Fuel Cell Tucson Plug-in Hybrid Venue Veracruz XG300 XG350