2022 Hyundai Kona Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Hyundai Kona, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2022 Kona — Year-Specific Fitment Context
The 2022 Hyundai Kona is in year 5 of 7 using the 5x114.3 pattern (2018–2024). Wheels from any 2018–2024 Hyundai Kona are cross-compatible with the 2022 model.
Hyundai Kona Bolt Pattern by Year
The table below shows how the Kona's wheel specifications have changed over the years. The 2022 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2022 Hyundai Kona
The 2022 Hyundai Kona uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. Offset should stay within 35-50mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct 12x1.5 thread pitch and appropriate seat type (conical or ball seat) to avoid wheel loosening. Verify that aftermarket wheels are load-rated for the Kona's weight. Cross-compatible with 2018–2024 Kona models.
Historical Fitment Data Reference
In our dataset, Hyundai Kona appears from 2018 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 99.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check inner clearance for brake calipers and suspension components when using lower offset (35mm) wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Hyundai Kona — Frequently Asked Questions
What is the bolt pattern for a 2022 Hyundai Kona?
The 2022 Hyundai Kona uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Kona have the same bolt pattern as the 2022?
The Hyundai Kona uses the 5x114.3 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2022 Hyundai Kona?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2022 Hyundai?
The 2022 Kona uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2022 Hyundai Kona use?
The 2022 Hyundai Kona uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2022 Hyundai Kona?
The factory center bore (hub bore) for the 2022 Hyundai Kona is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset