2019 Hyundai Kona Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Hyundai Kona, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 49 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 Kona — Year-Specific Fitment Context
The 2019 Hyundai Kona is in year 2 of 7 using the 5x114.3 pattern (2018–2024). Wheels from any 2018–2024 Hyundai Kona are cross-compatible with the 2019 model.
Hyundai Kona Bolt Pattern by Year
The table below shows how the Kona's wheel specifications have changed over the years. The 2019 model year is highlighted.
Fitment Notes
The 2019 Hyundai Kona has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Hyundai Kona appears from 2018 to 2024 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 99.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2019 Hyundai Kona — Frequently Asked Questions
What is the bolt pattern for a 2019 Hyundai Kona?
The 2019 Hyundai Kona uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 49mm.
What other years of Hyundai Kona have the same bolt pattern as the 2019?
The Hyundai Kona uses the 5x114.3 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Do 2019 Hyundai Konas use lug bolts or lug nuts?
The 2019 Kona requires M 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2019 Hyundai Kona?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 49mm, and a center bore of at least 67.1mm (using hub rings if larger).
Will wheels from another Hyundai fit my 2019 Kona?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What does 49mm offset mean for the 2019 Kona?
An offset of 49mm means the wheel's mounting surface is 49mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Hyundai Kona is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2018-2024 (7 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 99.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2019 Hyundai Kona, please report it via our About page contact so we can verify and update this record.