2026 Hyundai IONIQ 9 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Hyundai IONIQ 9 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45-50, and utilizes 12x1.5 (Cone seat, 21mm hex) fasteners tightened to 79-94 ft-lbs (107-127 Nm).
2026 Hyundai IONIQ 9 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 45-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79-94 ft-lbs (107-127 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 IONIQ 9 — Year-Specific Fitment Context
The 2026 is the only model year of the Hyundai IONIQ 9 in our database using the 5x114.3 bolt pattern.
2026 Hyundai IONIQ 9 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Hyundai IONIQ 9, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2006 Mitsubishi Galant | 67.1 mm (Exact) | 38-46 | 12x1.5 (Cone) |
| 2007 Mitsubishi Lancer | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2015 Mitsubishi Lancer Evolution | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2025 Mitsubishi Outlander | 67.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Mitsubishi Outlander PHEV | 67.1 mm (Exact) | 38-46 | 12x1.5 (Cone) |
| 2025 Mitsubishi Outlander Sport | 67.1 mm (Exact) | 38-46 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2003 Pontiac Grand Prix | 70.3 mm | 70.3mm → 67.1mm |
52 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 67.1mm |
12 |
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2021 Aston Martin DBS Superleggera | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2025 Aston Martin DBX | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79-94 ft-lbs (107-127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Hyundai IONIQ 9 — Frequently Asked Questions
What is the bolt pattern for a 2026 Hyundai IONIQ 9?
The 2026 Hyundai IONIQ 9 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What lug nut size does the 2026 Hyundai IONIQ 9 use?
The 2026 Hyundai IONIQ 9 uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2026 Hyundai IONIQ 9?
The OEM offset for the 2026 IONIQ 9 is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2026 Hyundai IONIQ 9s use lug bolts or lug nuts?
The 2026 IONIQ 9 requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2026 Hyundai IONIQ 9?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2026 Hyundai IONIQ 9?
The factory center bore (hub bore) for the 2026 Hyundai IONIQ 9 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →