2025 Mitsubishi Outlander PHEV Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Mitsubishi Outlander PHEV is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 38-46, and utilizes 12x1.5 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2025 Mitsubishi Outlander PHEV Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 38-46 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Outlander PHEV — Year-Specific Fitment Context
The 2025 Mitsubishi Outlander PHEV is in year 8 of 9 using the 5x114.3 pattern (2018–2026). Wheels from any 2018–2026 Mitsubishi Outlander PHEV are cross-compatible with the 2025 model.
Mitsubishi Outlander PHEV Bolt Pattern by Year
Looking for all generations? View the complete Mitsubishi Outlander PHEV (2018–2026) Bolt Pattern & Generation Guide →
The table below shows how the Outlander PHEV's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Mitsubishi Outlander PHEV Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Mitsubishi Outlander PHEV, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1994 Ford Probe | 67.1 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 2025 Genesis Electrified G80 | 67.1 mm (Exact) | 35-50 | 12x1.5 (Ball) |
| 2024 Genesis Electrified GV70 | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Genesis G70 | 67.1 mm (Exact) | 34-44 | 12x1.5 (Ball) |
| 2025 Genesis G80 | 67.1 mm (Exact) | 35-50 | 12x1.5 (Ball) |
| 2025 Genesis G90 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2026 Ford Explorer | 70.5 mm | 70.5mm → 67.1mm |
37.5 |
| 1993 Ford Mustang | 70.3 mm | 70.3mm → 67.1mm |
30 |
| 2025 Ford Mustang GTD | 70.5 mm | 70.5mm → 67.1mm |
Not Applicable |
| 1994 Ford Ranger Regular Cab | 70.3 mm | 70.3mm → 67.1mm |
12-20 |
| 1996 Ford Ranger SuperCab | 70.3 mm | 70.3mm → 67.1mm |
12-20 |
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Mitsubishi Outlander PHEV — Frequently Asked Questions
What is the bolt pattern for a 2025 Mitsubishi Outlander PHEV?
The 2025 Mitsubishi Outlander PHEV uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Outlander PHEV have the same bolt pattern as the 2025?
The Mitsubishi Outlander PHEV uses the 5x114.3 pattern from 2018 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 Mitsubishi Outlander PHEVs use lug bolts or lug nuts?
The 2025 Outlander PHEV requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 67.1mm center bore important for the 2025 Outlander PHEV?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2025 Mitsubishi Outlander PHEV use?
The 2025 Mitsubishi Outlander PHEV uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2025 Mitsubishi Outlander PHEV?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 Outlander PHEV, the PCD is 5x114.3.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →