2024 Mitsubishi Outlander PHEV Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Mitsubishi Outlander PHEV, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Outlander PHEV — Year-Specific Fitment Context
The 2024 model year is the final year of the Mitsubishi Outlander PHEV's 5x114.3 bolt pattern run (since 2018). Wheels from any 2018–2024 Mitsubishi Outlander PHEV are cross-compatible with the 2024 model.
Mitsubishi Outlander PHEV Bolt Pattern by Year
The table below shows how the Outlander PHEV's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Mitsubishi Outlander PHEV
When selecting aftermarket wheels for the 2024 Mitsubishi Outlander PHEV, the 67.1mm center bore is critical. Most aftermarket wheels have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset range is 38-46mm; deviating outside this may cause rubbing or clearance issues with suspension or brakes. Always verify lug nut thread pitch (12x1.5) and seat type—use conical (60-degree) or ball-seat nuts matching the wheel's design. Avoid using incorrect lug nuts, as they can loosen or damage the wheel. For a direct fit, wheels from 2018-2024 Outlander PHEV models are compatible.
Historical Fitment Data Reference
In our dataset, Mitsubishi Outlander PHEV appears from 2018 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels, always install hub-centric rings to match the 67.1mm center bore.
- ✅ Check that the wheel's hub bore is at least 67.1mm; if larger, rings are mandatory for safety.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Mitsubishi Outlander PHEV — Frequently Asked Questions
What is the bolt pattern for a 2024 Mitsubishi Outlander PHEV?
The 2024 Mitsubishi Outlander PHEV uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Outlander PHEV have the same bolt pattern as the 2024?
The Mitsubishi Outlander PHEV uses the 5x114.3 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
What is the center bore of a 2024 Mitsubishi Outlander PHEV?
The factory center bore (hub bore) for the 2024 Mitsubishi Outlander PHEV is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2024 Mitsubishi Outlander PHEV?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How tight should I torque the lug nuts on a 2024 Mitsubishi Outlander PHEV?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2024 Mitsubishi?
The 2024 Outlander PHEV uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset