2020 Mitsubishi Outlander PHEV Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Mitsubishi Outlander PHEV, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Outlander PHEV — Year-Specific Fitment Context
The 2020 Mitsubishi Outlander PHEV is in year 3 of 7 using the 5x114.3 pattern (2018–2024). Wheels from any 2018–2024 Mitsubishi Outlander PHEV are cross-compatible with the 2020 model.
Mitsubishi Outlander PHEV Bolt Pattern by Year
The table below shows how the Outlander PHEV's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Mitsubishi Outlander PHEV
The 2020 Mitsubishi Outlander PHEV uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The offset range is tight at 38-46mm; deviating outside this can cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (cone or ball seat) to avoid wheel loosening. Verify that aftermarket wheels are load-rated for the vehicle's weight, especially for PHEV battery mass. Stick to OEM or verified compatible wheels for safety.
Historical Fitment Data Reference
In our dataset, Mitsubishi Outlander PHEV appears from 2018 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and hub damage.
- ✅ Check brake caliper clearance when using wheels with offset near the 38mm limit, as the PHEV has larger brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Mitsubishi Outlander PHEV — Frequently Asked Questions
What is the bolt pattern for a 2020 Mitsubishi Outlander PHEV?
The 2020 Mitsubishi Outlander PHEV uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Outlander PHEV have the same bolt pattern as the 2020?
The Mitsubishi Outlander PHEV uses the 5x114.3 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Will wheels from another Mitsubishi fit my 2020 Outlander PHEV?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What does 38-46mm offset mean for the 2020 Outlander PHEV?
An offset of 38-46mm means the wheel's mounting surface is 38-46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mitsubishi.
What is the center bore of a 2020 Mitsubishi Outlander PHEV?
The factory center bore (hub bore) for the 2020 Mitsubishi Outlander PHEV is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2020 Mitsubishi Outlander PHEV?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2020 Outlander PHEV, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset