2018 Mitsubishi Outlander PHEV Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Mitsubishi Outlander PHEV, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Outlander PHEV — Year-Specific Fitment Context
The 2018 model year marks the beginning of the Mitsubishi Outlander PHEV's 5x114.3 bolt pattern era, which continued through 2024 (7 consecutive years). Wheels from any 2018–2024 Mitsubishi Outlander PHEV are cross-compatible with the 2018 model.
Mitsubishi Outlander PHEV Bolt Pattern by Year
The table below shows how the Outlander PHEV's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Mitsubishi Outlander PHEV
When selecting aftermarket wheels for your 2018 Mitsubishi Outlander PHEV, the 5x114.3 bolt pattern is standard, but the 67.1mm center bore is critical. Most aftermarket wheels have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 38mm; staying within ±5mm is recommended to avoid rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—either conical (60-degree) or ball seat—matching the wheel's design. Improper lug nuts can cause wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Mitsubishi Outlander PHEV appears from 2018 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (67.1mm ID to aftermarket bore) to eliminate vibrations and center the wheel properly.
- ✅ Stick to offsets between 33mm and 43mm to maintain safe clearance; lower offsets may rub the fender, higher offsets may contact the strut.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles, and always verify the lug nut seat type (conical or ball) matches your wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Mitsubishi Outlander PHEV — Frequently Asked Questions
What is the bolt pattern for a 2018 Mitsubishi Outlander PHEV?
The 2018 Mitsubishi Outlander PHEV uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38mm.
What other years of Mitsubishi Outlander PHEV have the same bolt pattern as the 2018?
The Mitsubishi Outlander PHEV uses the 5x114.3 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Why is matching the 67.1mm center bore important for the 2018 Outlander PHEV?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2018 Mitsubishi Outlander PHEV?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Outlander PHEV, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2018 Mitsubishi Outlander PHEV?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 38mm, and a center bore of at least 67.1mm (using hub rings if larger).
What lug nut size does the 2018 Mitsubishi Outlander PHEV use?
The 2018 Mitsubishi Outlander PHEV uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset