2026 Hyundai IONIQ 6 N Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Hyundai IONIQ 6 N is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 45-50, and utilizes 12x1.5 (Cone seat, 21mm hex) fasteners tightened to 79-94 ft-lbs (107-127 Nm).
2026 Hyundai IONIQ 6 N Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 45-50 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79-94 ft-lbs (107-127 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 IONIQ 6 N — Year-Specific Fitment Context
The 2026 is the only model year of the Hyundai IONIQ 6 N in our database using the 5x114.3 bolt pattern.
2026 Hyundai IONIQ 6 N Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Hyundai IONIQ 6 N, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2000 Dodge Stratus | 67.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2025 Ferrari 12Cilindri | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2025 Ferrari 296 | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2022 Ferrari 296 GTB | 67.1 mm (Exact) | 45 | 14x1.5 (Ball) |
| 2015 Ferrari 458 Italia | 67.1 mm (Exact) | 45 front, 58 rear | N 14x1.50 (Ball) |
| 2015 Ferrari 458 Speciale | 67.1 mm (Exact) | 45 front, 48 rear | N 14x1.50 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1993 Chrysler New Yorker | 71.6 mm | 71.6mm → 67.1mm |
40 |
| 2003 Dodge Caravan Cargo | 71.6 mm | 71.6mm → 67.1mm |
40 |
| 1998 Dodge Caravan Passenger | 71.6 mm | 71.6mm → 67.1mm |
40 |
| 2023 Dodge Challenger | 71.5 mm | 71.5mm → 67.1mm |
24 |
| 2015 Dodge Charger | 71.5 mm | 71.5mm → 67.1mm |
18 |
| 1995 Dodge Grand Caravan Passenger | 71.6 mm | 71.6mm → 67.1mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79-94 ft-lbs (107-127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Hyundai IONIQ 6 N — Frequently Asked Questions
What is the bolt pattern for a 2026 Hyundai IONIQ 6 N?
The 2026 Hyundai IONIQ 6 N uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What is the factory wheel offset for a 2026 Hyundai IONIQ 6 N?
The OEM offset for the 2026 IONIQ 6 N is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Hyundai fit my 2026 IONIQ 6 N?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Can I put aftermarket wheels on my 2026 Hyundai IONIQ 6 N?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
What does 45-50mm offset mean for the 2026 IONIQ 6 N?
An offset of 45-50mm means the wheel's mounting surface is 45-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
What is the PCD for a 2026 Hyundai IONIQ 6 N?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 IONIQ 6 N, the PCD is 5x114.3.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →