2026 Ford Explorer Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Ford Explorer is 5x114.3 (5x4.5"). It has a center bore of 70.5 mm, an offset range of 37.5, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2026 Ford Explorer Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 70.5 mm |
| Offset Range (ET) | 37.5 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Explorer — Year-Specific Fitment Context
The 2026 model year is the final year of the Ford Explorer's 5x114.3 bolt pattern run (since 1992). Wheels from any 1992–2026 Ford Explorer are cross-compatible with the 2026 model.
Ford Explorer Bolt Pattern by Year
Looking for all generations? View the complete Ford Explorer (1992–2026) Bolt Pattern & Generation Guide →
The table below shows how the Explorer's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 78.1 | 44 |
| 1993 | 5x114.3 | 78.1 | 44 |
| 1994 | 5x114.3 | 87.1 | 44 |
| 1995 | 5x114.3 | 87.1 | 44 |
| 1996 | 5x114.3 | 87.1 | 44 |
| 1997 | 5x114.3 | 87.1 | 44 |
| 1998 | 5x114.3 | 87.1 | 44 |
| 1999 | 5x114.3 | 78.1 | 44 |
| 2000 | 5x114.3 | 87.1 | 44 |
| 2001 | 5x114.3 | 87.1 | 44 |
| 2002 | 5x114.3 | 87.1 | 44 |
| 2003 | 5x114.3 | 87.1 | 44 |
| 2004 | 5x114.3 | 87.1 | 44 |
| 2005 | 5x114.3 | 87.1 | 44 |
| 2006 | 5x114.3 | 87.1 | 44 |
| 2007 | 5x114.3 | 87.1 | 44 |
| 2008 | 5x114.3 | 87.1 | 44 |
| 2009 | 5x114.3 | 87.1 | 44 |
| 2010 | 5x114.3 | 87.1 | 44 |
| 2011 | 5x114.3 | 70.5 | 44 |
| 2012 | 5x114.3 | 70.5 | 44 |
| 2013 | 5x114.3 | 70.5 | 44 |
| 2014 | 5x114.3 | 70.5 | 44 |
| 2015 | 5x114.3 | 70.5 | 44 |
| 2016 | 5x114.3 | 70.5 | 44 |
| 2017 | 5x114.3 | 70.5 | 44 |
| 2018 | 5x114.3 | 70.5 | 40 |
| 2019 | 5x114.3 | 70.5 | 40 |
| 2020 | 5x114.3 | 64.1 | 40 |
| 2021 | 5x114.3 | 64.1 | 40 |
| 2022 | 5x114.3 | 70.5 | 40 |
| 2023 | 5x114.3 | 70.5 | 40 |
| 2024 | 5x114.3 | 70.5 | 40 |
| 2025 | 5x114.3 | 70.5 | 37.5 |
| ▸ 2026 | 5x114.3 | 70.5 | 37.5 |
2026 Ford Explorer Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Ford Explorer, donor rims must match the 5x114.3 PCD and have a center bore of at least 70.5 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 70.5mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1994 Mercury Grand Marquis | 70.5 mm (Exact) | 0-40 | 1/2 20 (Cone) |
| 2003 Mercury Sable | 70.5 mm (Exact) | 40 | 12x1.5 (Cone) |
| 1999 Dodge Viper | 70.5 mm (Exact) | 50 front, 70 rear | N 1/2" (20 UNF) (Cone) |
| 2016 Ford Mustang | 70.5 mm (Exact) | 45 | N 14x1.50 (Cone) |
| 2025 Ford Mustang GTD | 70.5 mm (Exact) | Not Applicable | 14x1.5 (Cone) |
| 1995 Ford Ranger Regular Cab | 70.5 mm (Exact) | 12-20 | 1/2 20 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 70.5mm |
12 |
| 1993 Chrysler New Yorker | 71.6 mm | 71.6mm → 70.5mm |
40 |
| 2003 Dodge Caravan Cargo | 71.6 mm | 71.6mm → 70.5mm |
40 |
| 1998 Dodge Caravan Passenger | 71.6 mm | 71.6mm → 70.5mm |
40 |
| 2023 Dodge Challenger | 71.5 mm | 71.5mm → 70.5mm |
24 |
| 2015 Dodge Charger | 71.5 mm | 71.5mm → 70.5mm |
18 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Ford Explorer — Frequently Asked Questions
What is the bolt pattern for a 2026 Ford Explorer?
The 2026 Ford Explorer uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 37.5mm.
What other years of Ford Explorer have the same bolt pattern as the 2026?
The Ford Explorer uses the 5x114.3 pattern from 1992 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the factory wheel offset for a 2026 Ford Explorer?
The OEM offset for the 2026 Explorer is typically around 37.5mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 37.5mm offset mean for the 2026 Explorer?
An offset of 37.5mm means the wheel's mounting surface is 37.5mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Can I use spacers on my 2026 Ford Explorer?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 70.5mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How tight should I torque the lug nuts on a 2026 Ford Explorer?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →