2018 Ford Explorer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Ford Explorer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Explorer — Year-Specific Fitment Context
The 2018 Ford Explorer is in year 27 of 33 using the 5x114.3 pattern (1992–2024). Wheels from any 1992–2024 Ford Explorer are cross-compatible with the 2018 model.
Ford Explorer Bolt Pattern by Year
The table below shows how the Explorer's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.5 | 44 |
| 1993 | 5x114.3 | 70.5 | 44 |
| 1994 | 5x114.3 | 70.5 | 44 |
| 1995 | 5x114.3 | 70.5 | 44 |
| 1996 | 5x114.3 | 70.5 | 44 |
| 1997 | 5x114.3 | 70.5 | 44 |
| 1998 | 5x114.3 | 70.5 | 44 |
| 1999 | 5x114.3 | 70.5 | 44 |
| 2000 | 5x114.3 | 70.5 | 44 |
| 2001 | 5x114.3 | 70.5 | 44 |
| 2002 | 5x114.3 | 70.5 | 44 |
| 2003 | 5x114.3 | 70.5 | 44 |
| 2004 | 5x114.3 | 70.5 | 44 |
| 2005 | 5x114.3 | 70.5 | 44 |
| 2006 | 5x114.3 | 70.5 | 44 |
| 2007 | 5x114.3 | 70.5 | 44 |
| 2008 | 5x114.3 | 70.5 | 44 |
| 2009 | 5x114.3 | 70.5 | 44 |
| 2010 | 5x114.3 | 70.5 | 44 |
| 2011 | 5x114.3 | 70.5 | 44 |
| 2012 | 5x114.3 | 70.5 | 44 |
| 2013 | 5x114.3 | 70.5 | 44 |
| 2014 | 5x114.3 | 70.5 | 44 |
| 2015 | 5x114.3 | 70.5 | 44 |
| 2016 | 5x114.3 | 70.5 | 44 |
| 2017 | 5x114.3 | 70.5 | 44 |
| ▸ 2018 | 5x114.3 | 63.4 | 40 |
| 2019 | 5x114.3 | 63.4 | 40 |
| 2020 | 5x114.3 | 63.4 | 40 |
| 2021 | 5x114.3 | 63.4 | 40 |
| 2022 | 5x114.3 | 63.4 | 40 |
| 2023 | 5x114.3 | 63.4 | 40 |
| 2024 | 5x114.3 | 63.4 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Ford Explorer
The 2018 Ford Explorer uses a 5x114.3 bolt pattern with a 63.4mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to match this bore, preventing vibrations and ensuring proper load transfer. The recommended offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical/60-degree taper). Flat or ball-seat lug nuts are unsafe and can lead to wheel detachment. Verify that aftermarket wheels are hub-centric or use rings, and check offset compatibility before installation.
Historical Fitment Data Reference
In our dataset, Ford Explorer appears from 1992 to 2024 (33 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 4.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration and premature bearing wear.
- ✅ If lowering the vehicle, consider a slightly lower offset (e.g., 35mm) to prevent tire rub on the fender liner.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Ford Explorer — Frequently Asked Questions
What is the bolt pattern for a 2018 Ford Explorer?
The 2018 Ford Explorer uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 40mm.
What other years of Ford Explorer have the same bolt pattern as the 2018?
The Ford Explorer uses the 5x114.3 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What lug nut size does the 2018 Ford Explorer use?
The 2018 Ford Explorer uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 63.4mm center bore important for the 2018 Explorer?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2018 Ford Explorer?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How tight should I torque the lug nuts on a 2018 Ford Explorer?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset