2017 Ford Explorer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Ford Explorer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 44 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2017 Explorer — Year-Specific Fitment Context
The 2017 Ford Explorer is in year 26 of 33 using the 5x114.3 pattern (1992–2024). Wheels from any 1992–2024 Ford Explorer are cross-compatible with the 2017 model.
Ford Explorer Bolt Pattern by Year
The table below shows how the Explorer's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.5 | 44 |
| 1993 | 5x114.3 | 70.5 | 44 |
| 1994 | 5x114.3 | 70.5 | 44 |
| 1995 | 5x114.3 | 70.5 | 44 |
| 1996 | 5x114.3 | 70.5 | 44 |
| 1997 | 5x114.3 | 70.5 | 44 |
| 1998 | 5x114.3 | 70.5 | 44 |
| 1999 | 5x114.3 | 70.5 | 44 |
| 2000 | 5x114.3 | 70.5 | 44 |
| 2001 | 5x114.3 | 70.5 | 44 |
| 2002 | 5x114.3 | 70.5 | 44 |
| 2003 | 5x114.3 | 70.5 | 44 |
| 2004 | 5x114.3 | 70.5 | 44 |
| 2005 | 5x114.3 | 70.5 | 44 |
| 2006 | 5x114.3 | 70.5 | 44 |
| 2007 | 5x114.3 | 70.5 | 44 |
| 2008 | 5x114.3 | 70.5 | 44 |
| 2009 | 5x114.3 | 70.5 | 44 |
| 2010 | 5x114.3 | 70.5 | 44 |
| 2011 | 5x114.3 | 70.5 | 44 |
| 2012 | 5x114.3 | 70.5 | 44 |
| 2013 | 5x114.3 | 70.5 | 44 |
| 2014 | 5x114.3 | 70.5 | 44 |
| 2015 | 5x114.3 | 70.5 | 44 |
| 2016 | 5x114.3 | 70.5 | 44 |
| ▸ 2017 | 5x114.3 | 70.5 | 44 |
| 2018 | 5x114.3 | 63.4 | 40 |
| 2019 | 5x114.3 | 63.4 | 40 |
| 2020 | 5x114.3 | 63.4 | 40 |
| 2021 | 5x114.3 | 63.4 | 40 |
| 2022 | 5x114.3 | 63.4 | 40 |
| 2023 | 5x114.3 | 63.4 | 40 |
| 2024 | 5x114.3 | 63.4 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2017 Ford Explorer
When selecting wheels for your 2017 Ford Explorer, the 70.5mm center bore is critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 44mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always verify lug nut thread pitch (1/2" x 20) and seat type—factory uses conical (60-degree) seats. Using incorrect lug nuts can cause wheel loosening or damage. For optimal safety, choose wheels with load ratings matching or exceeding the Explorer's GVWR.
Historical Fitment Data Reference
In our dataset, Ford Explorer appears from 1992 to 2024 (33 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 4.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 35mm or above 50mm to prevent clearance issues with brake calipers and suspension components.
- ✅ If using aftermarket wheels, always install hub-centric rings to match the 70.5mm center bore; plastic rings are acceptable for street use.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Ford Explorer — Frequently Asked Questions
What is the bolt pattern for a 2017 Ford Explorer?
The 2017 Ford Explorer uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 44mm.
What other years of Ford Explorer have the same bolt pattern as the 2017?
The Ford Explorer uses the 5x114.3 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2017 Ford?
The 2017 Explorer uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 44mm offset mean for the 2017 Explorer?
An offset of 44mm means the wheel's mounting surface is 44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
What is the PCD for a 2017 Ford Explorer?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 Explorer, the PCD is 5x114.3.
Can I use spacers on my 2017 Ford Explorer?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 70.5mm center bore. Also verify that you have enough thread engagement for your N 1/2" hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset