2008 Ford Explorer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Ford Explorer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 44 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Explorer — Year-Specific Fitment Context
The 2008 Ford Explorer is in year 17 of 33 using the 5x114.3 pattern (1992–2024). Wheels from any 1992–2024 Ford Explorer are cross-compatible with the 2008 model.
Ford Explorer Bolt Pattern by Year
The table below shows how the Explorer's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.5 | 44 |
| 1993 | 5x114.3 | 70.5 | 44 |
| 1994 | 5x114.3 | 70.5 | 44 |
| 1995 | 5x114.3 | 70.5 | 44 |
| 1996 | 5x114.3 | 70.5 | 44 |
| 1997 | 5x114.3 | 70.5 | 44 |
| 1998 | 5x114.3 | 70.5 | 44 |
| 1999 | 5x114.3 | 70.5 | 44 |
| 2000 | 5x114.3 | 70.5 | 44 |
| 2001 | 5x114.3 | 70.5 | 44 |
| 2002 | 5x114.3 | 70.5 | 44 |
| 2003 | 5x114.3 | 70.5 | 44 |
| 2004 | 5x114.3 | 70.5 | 44 |
| 2005 | 5x114.3 | 70.5 | 44 |
| 2006 | 5x114.3 | 70.5 | 44 |
| 2007 | 5x114.3 | 70.5 | 44 |
| ▸ 2008 | 5x114.3 | 70.5 | 44 |
| 2009 | 5x114.3 | 70.5 | 44 |
| 2010 | 5x114.3 | 70.5 | 44 |
| 2011 | 5x114.3 | 70.5 | 44 |
| 2012 | 5x114.3 | 70.5 | 44 |
| 2013 | 5x114.3 | 70.5 | 44 |
| 2014 | 5x114.3 | 70.5 | 44 |
| 2015 | 5x114.3 | 70.5 | 44 |
| 2016 | 5x114.3 | 70.5 | 44 |
| 2017 | 5x114.3 | 70.5 | 44 |
| 2018 | 5x114.3 | 63.4 | 40 |
| 2019 | 5x114.3 | 63.4 | 40 |
| 2020 | 5x114.3 | 63.4 | 40 |
| 2021 | 5x114.3 | 63.4 | 40 |
| 2022 | 5x114.3 | 63.4 | 40 |
| 2023 | 5x114.3 | 63.4 | 40 |
| 2024 | 5x114.3 | 63.4 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Ford Explorer
For your 2008 Ford Explorer, the 5x114.3 bolt pattern is shared across 1992–2024 models, but critical dimensions differ. The 70.5mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and load stress. Offset is sensitive: stock is 44mm; deviations beyond ±5mm may cause rubbing or bearing wear. Always verify lug nut thread pitch (1/2"-20) and seat type—factory uses conical (60-degree) seats. Using incorrect lug nuts (e.g., ball seat) can lead to wheel detachment. For safety, ensure proper torque (100 ft-lbs) and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Ford Explorer appears from 1992 to 2024 (33 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 4.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50 miles of driving to account for settling.
- ✅ Avoid wheels with offset below 39mm or above 49mm to prevent rubbing on suspension or fenders.
- ✅ When using aftermarket wheels, always install hub-centric rings (70.5mm ID to wheel's bore) to eliminate vibrations.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Ford Explorer — Frequently Asked Questions
What is the bolt pattern for a 2008 Ford Explorer?
The 2008 Ford Explorer uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 44mm.
What other years of Ford Explorer have the same bolt pattern as the 2008?
The Ford Explorer uses the 5x114.3 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Do 2008 Ford Explorers use lug bolts or lug nuts?
The 2008 Explorer requires N 1/2" hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2008 Ford?
The 2008 Explorer uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2008 Ford Explorer?
Refer to your owner's manual for exact specs, but always tighten the N 1/2" hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2008 Ford Explorer?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 44mm, and a center bore of at least 70.5mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset