2020 Ford Explorer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Ford Explorer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2020 Explorer — Year-Specific Fitment Context
The 2020 Ford Explorer is in year 29 of 33 using the 5x114.3 pattern (1992–2024). Wheels from any 1992–2024 Ford Explorer are cross-compatible with the 2020 model.
Ford Explorer Bolt Pattern by Year
The table below shows how the Explorer's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.5 | 44 |
| 1993 | 5x114.3 | 70.5 | 44 |
| 1994 | 5x114.3 | 70.5 | 44 |
| 1995 | 5x114.3 | 70.5 | 44 |
| 1996 | 5x114.3 | 70.5 | 44 |
| 1997 | 5x114.3 | 70.5 | 44 |
| 1998 | 5x114.3 | 70.5 | 44 |
| 1999 | 5x114.3 | 70.5 | 44 |
| 2000 | 5x114.3 | 70.5 | 44 |
| 2001 | 5x114.3 | 70.5 | 44 |
| 2002 | 5x114.3 | 70.5 | 44 |
| 2003 | 5x114.3 | 70.5 | 44 |
| 2004 | 5x114.3 | 70.5 | 44 |
| 2005 | 5x114.3 | 70.5 | 44 |
| 2006 | 5x114.3 | 70.5 | 44 |
| 2007 | 5x114.3 | 70.5 | 44 |
| 2008 | 5x114.3 | 70.5 | 44 |
| 2009 | 5x114.3 | 70.5 | 44 |
| 2010 | 5x114.3 | 70.5 | 44 |
| 2011 | 5x114.3 | 70.5 | 44 |
| 2012 | 5x114.3 | 70.5 | 44 |
| 2013 | 5x114.3 | 70.5 | 44 |
| 2014 | 5x114.3 | 70.5 | 44 |
| 2015 | 5x114.3 | 70.5 | 44 |
| 2016 | 5x114.3 | 70.5 | 44 |
| 2017 | 5x114.3 | 70.5 | 44 |
| 2018 | 5x114.3 | 63.4 | 40 |
| 2019 | 5x114.3 | 63.4 | 40 |
| ▸ 2020 | 5x114.3 | 63.4 | 40 |
| 2021 | 5x114.3 | 63.4 | 40 |
| 2022 | 5x114.3 | 63.4 | 40 |
| 2023 | 5x114.3 | 63.4 | 40 |
| 2024 | 5x114.3 | 63.4 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2020 Ford Explorer
For the 2020 Ford Explorer, the bolt pattern is 5x114.3mm with a center bore of 63.4mm. When selecting aftermarket wheels, hub-centric rings are essential to match the bore and prevent vibrations. The recommended offset is around 40mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical/60-degree) to ensure proper clamping force. Avoid ball-seat lug nuts as they can loosen over time. Verify that aftermarket wheels have sufficient load rating for the Explorer's weight. Proper installation and torque to manufacturer specs are critical for safety.
Historical Fitment Data Reference
In our dataset, Ford Explorer appears from 1992 to 2024 (33 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 4.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure they remain tight.
- ✅ Check for brake caliper clearance when using wheels with a lower offset (e.g., 30mm) as they may contact the caliper.
- ✅ If using wheels from a 1992-2024 Explorer, confirm the center bore is 63.4mm; some older models may have a different bore.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Ford Explorer — Frequently Asked Questions
What is the bolt pattern for a 2020 Ford Explorer?
The 2020 Ford Explorer uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 40mm.
What other years of Ford Explorer have the same bolt pattern as the 2020?
The Ford Explorer uses the 5x114.3 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What is the factory wheel offset for a 2020 Ford Explorer?
The OEM offset for the 2020 Explorer is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2020 Ford Explorer?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Why is matching the 63.4mm center bore important for the 2020 Explorer?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What does 40mm offset mean for the 2020 Explorer?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset