2014 Acura MDX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Acura MDX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 MDX — Year-Specific Fitment Context
The 2014 Acura MDX is in year 14 of 16 using the 5x114.3 pattern (2001–2016). Wheels from any 2001–2016 Acura MDX are cross-compatible with the 2014 model. Note: the 2013 model used a different pattern (5x120), so its wheels are NOT interchangeable with the 2014. Across its full production run (2001–2024), the MDX has also used: 5x120.
Acura MDX Bolt Pattern by Year
The table below shows how the MDX's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| 2003 | 5x114.3 | 64.1 | 45 |
| 2004 | 5x114.3 | 64.1 | 45 |
| 2005 | 5x114.3 | 64.1 | 45 |
| 2006 | 5x114.3 | 64.1 | 45 |
| 2007 | 5x120 | 64.1 | 45 |
| 2008 | 5x120 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 45 |
| 2010 | 5x120 | 64.1 | 45 |
| 2011 | 5x120 | 64.1 | 45 |
| 2012 | 5x120 | 64.1 | 45 |
| 2013 | 5x120 | 64.1 | 45 |
| ▸ 2014 | 5x114.3 | 64.1 | 45 |
| 2015 | 5x114.3 | 64.1 | 45 |
| 2016 | 5x114.3 | 64.1 | 45 |
| 2017 | 5x120 | 64.1 | 55 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2014 Acura MDX
For your 2014 Acura MDX, the bolt pattern is 5x114.3 with a center bore of 64.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The recommended offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree) to ensure proper clamping force. Avoid wheels from the 2013 MDX (5x120 pattern). Cross-compatible wheels from 2001–2016 MDX models fit, but verify offset and bore.
Historical Fitment Data Reference
In our dataset, Acura MDX appears from 2001 to 2024 (23 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to maintain proper clamping force.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings to center the wheel on the hub.
- ✅ Check for brake caliper clearance, especially with wheels that have a lower offset (e.g., 35mm) or larger diameter.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Acura MDX — Frequently Asked Questions
What is the bolt pattern for a 2014 Acura MDX?
The 2014 Acura MDX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura MDX have the same bolt pattern as the 2014?
The Acura MDX uses the 5x114.3 pattern from 2001 through 2016. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Can I use 2013 Acura MDX wheels on a 2014?
No. The 2013 MDX used a 5x120 bolt pattern, which differs from the 2014's 5x114.3. They are not interchangeable.
Can I use spacers on my 2014 Acura MDX?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Can I put aftermarket wheels on my 2014 Acura MDX?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 64.1mm (using hub rings if larger).
What is the PCD for a 2014 Acura MDX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 MDX, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset