2008 Acura MDX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Acura MDX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 MDX — Year-Specific Fitment Context
The 2008 Acura MDX is in year 2 of 18 using the 5x120 pattern (2007–2024). Wheels from any 2007–2024 Acura MDX are cross-compatible with the 2008 model. Across its full production run (2001–2024), the MDX has also used: 5x114.3.
Acura MDX Bolt Pattern by Year
The table below shows how the MDX's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| 2003 | 5x114.3 | 64.1 | 45 |
| 2004 | 5x114.3 | 64.1 | 45 |
| 2005 | 5x114.3 | 64.1 | 45 |
| 2006 | 5x114.3 | 64.1 | 45 |
| 2007 | 5x120 | 64.1 | 45 |
| ▸ 2008 | 5x120 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 45 |
| 2010 | 5x120 | 64.1 | 45 |
| 2011 | 5x120 | 64.1 | 45 |
| 2012 | 5x120 | 64.1 | 45 |
| 2013 | 5x120 | 64.1 | 45 |
| 2014 | 5x114.3 | 64.1 | 45 |
| 2015 | 5x114.3 | 64.1 | 45 |
| 2016 | 5x114.3 | 64.1 | 45 |
| 2017 | 5x120 | 64.1 | 55 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2008 Acura MDX
When selecting aftermarket wheels for your 2008 Acura MDX, the 64.1mm center bore is critical. Most aftermarket wheels have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 45mm; staying within ±5mm is recommended to avoid rubbing or clearance issues with suspension and brakes. Always verify lug nut thread pitch (14x1.5) and seat type—factory uses ball seat, but aftermarket wheels often require conical (60-degree) seat lugs. Using incorrect lugs can cause wheel loosening. For wheels from 2007–2024 MDX models, direct fitment is possible, but double-check bore and offset.
Historical Fitment Data Reference
In our dataset, Acura MDX appears from 2001 to 2024 (23 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ If using aftermarket wheels with a larger bore, install hub-centric rings made of metal (not plastic) for durability.
- ✅ Avoid wheels with offset below 40mm on the front, as they may contact the brake caliper or fender liner.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Acura MDX — Frequently Asked Questions
What is the bolt pattern for a 2008 Acura MDX?
The 2008 Acura MDX uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura MDX have the same bolt pattern as the 2008?
The Acura MDX uses the 5x120 pattern from 2007 through 2024. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use spacers on my 2008 Acura MDX?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the center bore of a 2008 Acura MDX?
The factory center bore (hub bore) for the 2008 Acura MDX is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2008 Acura MDX use?
The 2008 Acura MDX uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2008 Acura MDX?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset