2024 VinFast VF 9 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 VinFast VF 9 is 5x120. It has a center bore of 74.1 mm, an offset range of 45, and utilizes 14x1.25 (Flat seat, 21mm hex) fasteners tightened to 94 ft-lbs (127 Nm).
2024 VinFast VF 9 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Center Bore (Hub Bore) | 74.1 mm |
| Offset Range (ET) | 45 |
| Thread Size (Lug Nut / Bolt) | 14x1.25 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 94 ft-lbs (127 Nm) |
2024 VF 9 — Year-Specific Fitment Context
The 2024 model year marks the beginning of the VinFast VF 9's 5x120 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 VinFast VF 9 are cross-compatible with the 2024 model. Note: the 2023 model used a different pattern (5x114.3), so its wheels are NOT interchangeable with the 2024. Across its full production run (2023–2026), the VF 9 has also used: 5x114.3.
VinFast VF 9 Bolt Pattern by Year
Looking for all generations? View the complete VinFast VF 9 (2023–2026) Bolt Pattern & Generation Guide →
The table below shows how the VF 9's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 VinFast VF 9 Wheel Interchange & Donor Fitment Guide (5x120)
The 5x120 bolt pattern is shared by 641 vehicles in our database (common). For safe wheel swaps on the 2024 VinFast VF 9, donor rims must match the 5x120 PCD and have a center bore of at least 74.1 mm:
DIRECT HUB MATCH Same 5x120 Pattern & Exact 74.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 VinFast VF 7 | 74.1 mm (Exact) | 40 | 14x1.25 (Flat) |
| 2024 VinFast VF 8 | 74.1 mm (Exact) | 35-45mm | 14x1.25 (Flat) |
| 1997 BMW 5 Series | 74.1 mm (Exact) | 25 | B 12x1.50 (Cone) |
| 2008 BMW X5 | 74.1 mm (Exact) | 46 | B 14x1.25 (Cone) |
| 2025 VinFast VF 6 | 74.1 mm (Exact) | 45 | 14x1.25 (Flat) |
| 2010 BMW X5 M | 74.1 mm (Exact) | 46 | B 14x1.25 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 94 ft-lbs (127 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 VinFast VF 9 — Frequently Asked Questions
What is the bolt pattern for a 2024 VinFast VF 9?
The 2024 VinFast VF 9 uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 74.1mm and the offset is 45mm.
What other years of VinFast VF 9 have the same bolt pattern as the 2024?
The VinFast VF 9 uses the 5x120 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Can I use 2023 VinFast VF 9 wheels on a 2024?
No. The 2023 VF 9 used a 5x114.3 bolt pattern, which differs from the 2024's 5x120. They are not interchangeable.
Can I put aftermarket wheels on my 2024 VinFast VF 9?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 45mm, and a center bore of at least 74.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2024 VinFast VF 9?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2024 VinFast VF 9?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 VF 9, the PCD is 5x120.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →