2010 Acura MDX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Acura MDX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 MDX — Year-Specific Fitment Context
The 2010 Acura MDX is in year 4 of 18 using the 5x120 pattern (2007–2024). Wheels from any 2007–2024 Acura MDX are cross-compatible with the 2010 model. Across its full production run (2001–2024), the MDX has also used: 5x114.3.
Acura MDX Bolt Pattern by Year
The table below shows how the MDX's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| 2003 | 5x114.3 | 64.1 | 45 |
| 2004 | 5x114.3 | 64.1 | 45 |
| 2005 | 5x114.3 | 64.1 | 45 |
| 2006 | 5x114.3 | 64.1 | 45 |
| 2007 | 5x120 | 64.1 | 45 |
| 2008 | 5x120 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 45 |
| ▸ 2010 | 5x120 | 64.1 | 45 |
| 2011 | 5x120 | 64.1 | 45 |
| 2012 | 5x120 | 64.1 | 45 |
| 2013 | 5x120 | 64.1 | 45 |
| 2014 | 5x114.3 | 64.1 | 45 |
| 2015 | 5x114.3 | 64.1 | 45 |
| 2016 | 5x114.3 | 64.1 | 45 |
| 2017 | 5x120 | 64.1 | 55 |
| 2018 | 5x120 | 64.1 | 55 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2010 Acura MDX
The 2010 Acura MDX uses a 5x120 bolt pattern with a 64.1mm center bore and 45mm offset. When selecting aftermarket wheels, hub-centric rings are mandatory to match the 64.1mm bore, preventing vibrations and ensuring proper load distribution. The 45mm offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.5) and seat type—use conical (60-degree) or ball-seat lugs as specified. Never mix seat types. Re-torque after 50-100 miles. Wheels from 2007-2024 MDX models are direct fit.
Historical Fitment Data Reference
In our dataset, Acura MDX appears from 2001 to 2024 (23 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore larger than 64.1mm without hub-centric rings.
- ✅ Check brake caliper clearance when using wheels with offset below 40mm.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Acura MDX — Frequently Asked Questions
What is the bolt pattern for a 2010 Acura MDX?
The 2010 Acura MDX uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura MDX have the same bolt pattern as the 2010?
The Acura MDX uses the 5x120 pattern from 2007 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2010 Acura MDX?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 45mm, and a center bore of at least 64.1mm (using hub rings if larger).
What is the PCD for a 2010 Acura MDX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 MDX, the PCD is 5x120.
Can I use spacers on my 2010 Acura MDX?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the factory wheel offset for a 2010 Acura MDX?
The OEM offset for the 2010 MDX is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset