2020 Land Rover Defender 110 Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Land Rover Defender 110, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x120
Lug Nut / Bolt Size 14x1.5
Center Bore (CB) 72.6 mm
Offset (ET) 41
Torque Specs 100 ft-lbs (135 Nm)

2020 Defender 110 — Year-Specific Fitment Context

The 2020 model year marks the beginning of the Land Rover Defender 110's 5x120 bolt pattern era, which continued through 2024 (5 consecutive years). Wheels from any 2020–2024 Land Rover Defender 110 are cross-compatible with the 2020 model. Across its full production run (1993–2024), the Defender 110 has also used: 5x165.1.

Land Rover Defender 110 Bolt Pattern by Year

The table below shows how the Defender 110's wheel specifications have changed over the years. The 2020 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1993 5x165.1 114.3 33
▸ 2020 5x120 72.6 41
2021 5x120 72.6 41
2022 5x120 72.6 41
2023 5x120 72.6 41
2024 5x120 72.6 41

Fitment Notes

The 2020 Land Rover Defender 110 has a bolt pattern of 5x120.

This means it is a 5 lug pattern with a circle diameter of 120mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Land Rover Defender 110 appears from 1993 to 2024 (6 model years).

Across model years, this model appears with 2 bolt patterns (5x120, 5x165.1).

5x120 Pattern Context

This bolt pattern appears on 633 vehicles in our current database and is considered common.

Examples of other vehicles using 5x120:

2020 Land Rover Defender 110 — Frequently Asked Questions

What is the bolt pattern for a 2020 Land Rover Defender 110?

The 2020 Land Rover Defender 110 uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 41mm.

What other years of Land Rover Defender 110 have the same bolt pattern as the 2020?

The Land Rover Defender 110 uses the 5x120 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.

Why is matching the 72.6mm center bore important for the 2020 Defender 110?

The 72.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

What is the factory wheel offset for a 2020 Land Rover Defender 110?

The OEM offset for the 2020 Defender 110 is typically around 41mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Can I put aftermarket wheels on my 2020 Land Rover Defender 110?

Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 41mm, and a center bore of at least 72.6mm (using hub rings if larger).

What does 41mm offset mean for the 2020 Defender 110?

An offset of 41mm means the wheel's mounting surface is 41mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Land Rover.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Land Rover Defender 110 has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2020 Land Rover Defender 110, please report it via our About page contact so we can verify and update this record.

Land Rover Defender 110 By Year

1993 2020 2021 2022 2023 2024

Other Land Rover Models

Defender 110 Defender 130 Defender 90 Discovery Discovery Series II Discovery Sport Freelander LR2 LR3 LR4 Range Rover Range Rover Evoque Range Rover Sport Range Rover Velar