2025 Land Rover Defender Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Land Rover Defender is 5x120. It has a center bore of 72.6 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2025 Land Rover Defender Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Center Bore (Hub Bore) | 72.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2025 Defender — Year-Specific Fitment Context
The 2025 Land Rover Defender is in year 2 of 3 using the 5x120 pattern (2024–2026). Wheels from any 2024–2026 Land Rover Defender are cross-compatible with the 2025 model.
Land Rover Defender Bolt Pattern by Year
Looking for all generations? View the complete Land Rover Defender (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Defender's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Land Rover Defender Wheel Interchange & Donor Fitment Guide (5x120)
The 5x120 bolt pattern is shared by 641 vehicles in our database (common). For safe wheel swaps on the 2025 Land Rover Defender, donor rims must match the 5x120 PCD and have a center bore of at least 72.6 mm:
DIRECT HUB MATCH Same 5x120 Pattern & Exact 72.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2020 Land Rover Defender 110 | 72.6 mm (Exact) | 41 | 14x1.5 (Cone) |
| 2025 Land Rover Defender 130 | 72.6 mm (Exact) | 41 | 14x1.5 (Cone) |
| 2020 Land Rover Defender 90 | 72.6 mm (Exact) | 41 | 14x1.5 (Cone) |
| 2004 Land Rover Discovery | 72.6 mm (Exact) | 55 | N 14x1.50 (Cone) |
| 2016 Land Rover LR4 | 72.6 mm (Exact) | 53 | 14x1.5 (Cone) |
| 2002 Land Rover Range Rover | 72.6 mm (Exact) | 52 | N 14x1.50 (Cone) |
HUB RING FITMENT Same 5x120 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 VinFast VF 6 | 74.1 mm | 74.1mm → 72.6mm |
45 |
| 2025 VinFast VF 7 | 74.1 mm | 74.1mm → 72.6mm |
40 |
| 2024 VinFast VF 8 | 74.1 mm | 74.1mm → 72.6mm |
35-45mm |
| 2024 VinFast VF 9 | 74.1 mm | 74.1mm → 72.6mm |
45 |
| 1997 BMW 5 Series | 74.1 mm | 74.1mm → 72.6mm |
25 |
| 2008 BMW X5 | 74.1 mm | 74.1mm → 72.6mm |
46 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Land Rover Defender — Frequently Asked Questions
What is the bolt pattern for a 2025 Land Rover Defender?
The 2025 Land Rover Defender uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 35-45mm.
What other years of Land Rover Defender have the same bolt pattern as the 2025?
The Land Rover Defender uses the 5x120 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I use spacers on my 2025 Land Rover Defender?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 72.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What lug nut size does the 2025 Land Rover Defender use?
The 2025 Land Rover Defender uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2025 Land Rover Defender?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 Defender, the PCD is 5x120.
What is the center bore of a 2025 Land Rover Defender?
The factory center bore (hub bore) for the 2025 Land Rover Defender is 72.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →