2026 Land Rover Defender Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Land Rover Defender is 5x120. It has a center bore of 72.6 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Land Rover Defender Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Center Bore (Hub Bore) | 72.6 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 Defender — Year-Specific Fitment Context
The 2026 model year is the final year of the Land Rover Defender's 5x120 bolt pattern run (since 2024). Wheels from any 2024–2026 Land Rover Defender are cross-compatible with the 2026 model.
Land Rover Defender Bolt Pattern by Year
Looking for all generations? View the complete Land Rover Defender (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Defender's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Land Rover Defender Wheel Interchange & Donor Fitment Guide (5x120)
The 5x120 bolt pattern is shared by 641 vehicles in our database (common). For safe wheel swaps on the 2026 Land Rover Defender, donor rims must match the 5x120 PCD and have a center bore of at least 72.6 mm:
DIRECT HUB MATCH Same 5x120 Pattern & Exact 72.6mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Land Rover Defender 130 | 72.6 mm (Exact) | 41 | 14x1.5 (Cone) |
| 2020 Land Rover Defender 90 | 72.6 mm (Exact) | 41 | 14x1.5 (Cone) |
| 2016 Land Rover LR4 | 72.6 mm (Exact) | 53 | 14x1.5 (Cone) |
| 2002 Land Rover Range Rover | 72.6 mm (Exact) | 52 | N 14x1.50 (Cone) |
| 2025 Land Rover Range Rover Sport | 72.6 mm (Exact) | 40-50 | 14x1.5 (Ball) |
| 2025 Lucid Gravity | 72.5 mm (Exact) | 40 | 14x1.5 (Cone) |
HUB RING FITMENT Same 5x120 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 VinFast VF 6 | 74.1 mm | 74.1mm → 72.6mm |
45 |
| 2025 VinFast VF 7 | 74.1 mm | 74.1mm → 72.6mm |
40 |
| 2024 VinFast VF 8 | 74.1 mm | 74.1mm → 72.6mm |
35-45mm |
| 2024 VinFast VF 9 | 74.1 mm | 74.1mm → 72.6mm |
45 |
| 1997 BMW 5 Series | 74.1 mm | 74.1mm → 72.6mm |
25 |
| 2008 BMW X5 | 74.1 mm | 74.1mm → 72.6mm |
46 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Land Rover Defender — Frequently Asked Questions
What is the bolt pattern for a 2026 Land Rover Defender?
The 2026 Land Rover Defender uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 35-45mm.
What other years of Land Rover Defender have the same bolt pattern as the 2026?
The Land Rover Defender uses the 5x120 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What lug nut size does the 2026 Land Rover Defender use?
The 2026 Land Rover Defender uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2026 Land Rover Defender?
The OEM offset for the 2026 Defender is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2026 Land Rover Defender?
The factory center bore (hub bore) for the 2026 Land Rover Defender is 72.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2026 Land Rover?
The 2026 Defender uses a 5x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →