2023 Land Rover Defender 110 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2023 Land Rover Defender 110, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 41 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2023 Defender 110 — Year-Specific Fitment Context
The 2023 Land Rover Defender 110 is in year 4 of 5 using the 5x120 pattern (2020–2024). Wheels from any 2020–2024 Land Rover Defender 110 are cross-compatible with the 2023 model. Across its full production run (1993–2024), the Defender 110 has also used: 5x165.1.
Land Rover Defender 110 Bolt Pattern by Year
The table below shows how the Defender 110's wheel specifications have changed over the years. The 2023 model year is highlighted.
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2023 Land Rover Defender 110
For the 2023 Land Rover Defender 110, the 5x120 bolt pattern is shared with 2020–2024 models. The center bore is 72.6mm; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load distribution. The recommended offset is 41mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (cone or ball seat) to avoid wheel loosening. Re-torque after 50-100 miles. Note: earlier Defenders (1993–2016) used 5x165.1; those wheels are not compatible.
Historical Fitment Data Reference
In our dataset, Land Rover Defender 110 appears from 1993 to 2024 (6 model years). Across model years, this model appears with 2 bolt patterns (5x120, 5x165.1).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 Nm after 50-100 miles of driving.
- ✅ Aftermarket wheels with a bore >72.6mm need hub-centric rings; avoid relying solely on lug nuts for centering.
- ✅ Check offset carefully: lower offset (e.g., 35mm) may cause tire rub on fenders; higher offset (e.g., 45mm) may contact suspension components.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2023 Land Rover Defender 110 — Frequently Asked Questions
What is the bolt pattern for a 2023 Land Rover Defender 110?
The 2023 Land Rover Defender 110 uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 41mm.
What other years of Land Rover Defender 110 have the same bolt pattern as the 2023?
The Land Rover Defender 110 uses the 5x120 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2023, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2023 Land Rover?
The 2023 Defender 110 uses a 5x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2023 Land Rover Defender 110?
The OEM offset for the 2023 Defender 110 is typically around 41mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2023 Land Rover Defender 110?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 41mm, and a center bore of at least 72.6mm (using hub rings if larger).
What is the PCD for a 2023 Land Rover Defender 110?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2023 Defender 110, the PCD is 5x120.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset