2022 Land Rover Defender 110 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Land Rover Defender 110, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 41 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2022 Defender 110 — Year-Specific Fitment Context
The 2022 Land Rover Defender 110 is in year 3 of 5 using the 5x120 pattern (2020–2024). Wheels from any 2020–2024 Land Rover Defender 110 are cross-compatible with the 2022 model. Across its full production run (1993–2024), the Defender 110 has also used: 5x165.1.
Land Rover Defender 110 Bolt Pattern by Year
The table below shows how the Defender 110's wheel specifications have changed over the years. The 2022 model year is highlighted.
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2022 Land Rover Defender 110
For your 2022 Land Rover Defender 110, the 5x120 bolt pattern is shared with 2020–2024 models. The 72.6mm center bore is critical: aftermarket wheels with a larger bore require hub-centric rings to prevent vibrations and ensure proper load distribution. Offset is sensitive; the factory 41mm offset maintains suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with 14x1.5 thread pitch and correct seat type (cone or ball) to avoid wheel loosening. Never reuse old lug nuts; torque to manufacturer specs (typically 103 lb-ft).
Historical Fitment Data Reference
In our dataset, Land Rover Defender 110 appears from 1993 to 2024 (6 model years). Across model years, this model appears with 2 bolt patterns (5x120, 5x165.1).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to account for wheel settling.
- ✅ Avoid spacers without extended studs; they can reduce thread engagement and cause failure.
- ✅ Check brake caliper clearance when changing offset; some aftermarket wheels may require spacers.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Land Rover Defender 110 — Frequently Asked Questions
What is the bolt pattern for a 2022 Land Rover Defender 110?
The 2022 Land Rover Defender 110 uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 41mm.
What other years of Land Rover Defender 110 have the same bolt pattern as the 2022?
The Land Rover Defender 110 uses the 5x120 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
Will wheels from another Land Rover fit my 2022 Defender 110?
Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 72.6mm.
How tight should I torque the lug nuts on a 2022 Land Rover Defender 110?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2022 Land Rover Defender 110?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 72.6mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the factory wheel offset for a 2022 Land Rover Defender 110?
The OEM offset for the 2022 Defender 110 is typically around 41mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset