2019 Honda Passport Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Honda Passport, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Passport — Year-Specific Fitment Context
The 2019 model year marks the beginning of the Honda Passport's 5x120 bolt pattern era, which continued through 2024 (6 consecutive years). Wheels from any 2019–2024 Honda Passport are cross-compatible with the 2019 model. Across its full production run (1994–2024), the Passport has also used: 5x114.3.
Honda Passport Bolt Pattern by Year
The table below shows how the Passport's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x114.3 | 64.1 | 45 |
| 1995 | 5x114.3 | 64.1 | 45 |
| 1996 | 5x114.3 | 64.1 | 45 |
| 1997 | 5x114.3 | 64.1 | 45 |
| 1998 | 5x114.3 | 64.1 | 45 |
| 1999 | 5x114.3 | 64.1 | 45 |
| 2000 | 5x114.3 | 64.1 | 45 |
| 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| ▸ 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2019 Honda Passport
For your 2019 Honda Passport, the 5x120 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels must have a 64.1mm bore or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct 14x1.5 lug nuts with a conical (60-degree) seat—never ball seat—to avoid wheel loosening. Verify that aftermarket wheels are hub-centric and lug nuts are torqued to spec (80 ft-lbs).
Historical Fitment Data Reference
In our dataset, Honda Passport appears from 1994 to 2024 (15 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from pre-2019 Passports (5x114.3) without adapters; they are not compatible.
- ✅ Check inner clearance for aftermarket wheels; offset changes can cause contact with brake calipers or suspension.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Honda Passport — Frequently Asked Questions
What is the bolt pattern for a 2019 Honda Passport?
The 2019 Honda Passport uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 55mm.
What other years of Honda Passport have the same bolt pattern as the 2019?
The Honda Passport uses the 5x120 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the factory wheel offset for a 2019 Honda Passport?
The OEM offset for the 2019 Passport is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2019 Honda Passport?
The factory center bore (hub bore) for the 2019 Honda Passport is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2019 Honda Passport use?
The 2019 Honda Passport uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2019 Honda Passport?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset