1997 Honda Passport Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Honda Passport, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1997 Passport — Year-Specific Fitment Context
The 1997 Honda Passport is in year 4 of 9 using the 5x114.3 pattern (1994–2002). Wheels from any 1994–2002 Honda Passport are cross-compatible with the 1997 model. Across its full production run (1994–2024), the Passport has also used: 5x120.
Honda Passport Bolt Pattern by Year
The table below shows how the Passport's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x114.3 | 64.1 | 45 |
| 1995 | 5x114.3 | 64.1 | 45 |
| 1996 | 5x114.3 | 64.1 | 45 |
| ▸ 1997 | 5x114.3 | 64.1 | 45 |
| 1998 | 5x114.3 | 64.1 | 45 |
| 1999 | 5x114.3 | 64.1 | 45 |
| 2000 | 5x114.3 | 64.1 | 45 |
| 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1997 Honda Passport
For your 1997 Honda Passport, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct 12x1.5 thread pitch and a conical (60-degree) or ball seat matching your wheels. Never use incorrect lug nuts—this can lead to wheel detachment. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully to avoid suspension or brake interference.
Historical Fitment Data Reference
In our dataset, Honda Passport appears from 1994 to 2024 (15 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 64.1mm bore.
- ✅ Avoid wheels with offset below 40mm or above 50mm to prevent rubbing on struts or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Honda Passport — Frequently Asked Questions
What is the bolt pattern for a 1997 Honda Passport?
The 1997 Honda Passport uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Honda Passport have the same bolt pattern as the 1997?
The Honda Passport uses the 5x114.3 pattern from 1994 through 2002. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Will wheels from another Honda fit my 1997 Passport?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
What lug nut size does the 1997 Honda Passport use?
The 1997 Honda Passport uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 1997 Honda Passport?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the center bore of a 1997 Honda Passport?
The factory center bore (hub bore) for the 1997 Honda Passport is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset