1998 Honda Passport Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Honda Passport, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1998 Passport — Year-Specific Fitment Context
The 1998 Honda Passport is in year 5 of 9 using the 5x114.3 pattern (1994–2002). Wheels from any 1994–2002 Honda Passport are cross-compatible with the 1998 model. Across its full production run (1994–2024), the Passport has also used: 5x120.
Honda Passport Bolt Pattern by Year
The table below shows how the Passport's wheel specifications have changed over the years. The 1998 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1994 | 5x114.3 | 64.1 | 45 |
| 1995 | 5x114.3 | 64.1 | 45 |
| 1996 | 5x114.3 | 64.1 | 45 |
| 1997 | 5x114.3 | 64.1 | 45 |
| ▸ 1998 | 5x114.3 | 64.1 | 45 |
| 1999 | 5x114.3 | 64.1 | 45 |
| 2000 | 5x114.3 | 64.1 | 45 |
| 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x120 | 64.1 | 55 |
| 2020 | 5x120 | 64.1 | 55 |
| 2021 | 5x120 | 64.1 | 55 |
| 2022 | 5x120 | 64.1 | 55 |
| 2023 | 5x120 | 64.1 | 55 |
| 2024 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1998 Honda Passport
For your 1998 Honda Passport, the 5x114.3 bolt pattern is shared with 1994–2002 models, ensuring cross-compatibility. The 64.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration. Offset is sensitive; stick to 45mm ±5mm to avoid rubbing or clearance issues. Always use 12x1.5 lug nuts with the correct seat type (cone or ball) to ensure proper clamping force and prevent wheel loosening. Verify wheel load rating exceeds vehicle weight for safety.
Historical Fitment Data Reference
In our dataset, Honda Passport appears from 1994 to 2024 (15 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid wheels with offset below 40mm to prevent fender rubbing on the 1998 Passport.
- ✅ Check that aftermarket wheels have a center bore larger than 64.1mm; use hub-centric rings to center the wheel.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1998 Honda Passport — Frequently Asked Questions
What is the bolt pattern for a 1998 Honda Passport?
The 1998 Honda Passport uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Honda Passport have the same bolt pattern as the 1998?
The Honda Passport uses the 5x114.3 pattern from 1994 through 2002. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
What is the factory wheel offset for a 1998 Honda Passport?
The OEM offset for the 1998 Passport is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 1998 Honda?
The 1998 Passport uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 1998 Honda Passport?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 64.1mm (using hub rings if larger).
What lug nut size does the 1998 Honda Passport use?
The 1998 Honda Passport uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset