2019 INFINITI QX30 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 INFINITI QX30, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 QX30 — Year-Specific Fitment Context
The 2019 model year is the final year of the INFINITI QX30's 5x114.3 bolt pattern run (since 2017). Wheels from any 2017–2019 INFINITI QX30 are cross-compatible with the 2019 model.
INFINITI QX30 Bolt Pattern by Year
The table below shows how the QX30's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 INFINITI QX30
For your 2019 INFINITI QX30, the 5x114.3 bolt pattern is shared with many Nissan/Infiniti models, but the 66.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset range of 40-50mm is sensitive; deviating can cause rubbing or poor handling. Always use lug nuts with the correct 12x1.25 thread pitch and matching seat type (cone or ball) to avoid wheel loosening. Verify that aftermarket wheels clear the brake calipers and suspension components.
Historical Fitment Data Reference
In our dataset, INFINITI QX30 appears from 2017 to 2019 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Use hub-centric rings if aftermarket wheels have a larger center bore than 66.1mm.
- ✅ Avoid offsets below 40mm (too aggressive) to prevent fender rubbing and bearing stress.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 INFINITI QX30 — Frequently Asked Questions
What is the bolt pattern for a 2019 INFINITI QX30?
The 2019 INFINITI QX30 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI QX30 have the same bolt pattern as the 2019?
The INFINITI QX30 uses the 5x114.3 pattern from 2017 through 2019. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What lug nut size does the 2019 INFINITI QX30 use?
The 2019 INFINITI QX30 uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another INFINITI fit my 2019 QX30?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What does 40-50mm offset mean for the 2019 QX30?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.
Can I put aftermarket wheels on my 2019 INFINITI QX30?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40-50mm, and a center bore of at least 66.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset