2017 INFINITI QX30 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 INFINITI QX30, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2017 QX30 — Year-Specific Fitment Context
The 2017 model year marks the beginning of the INFINITI QX30's 5x114.3 bolt pattern era, which continued through 2019 (3 consecutive years). Wheels from any 2017–2019 INFINITI QX30 are cross-compatible with the 2017 model.
INFINITI QX30 Bolt Pattern by Year
The table below shows how the QX30's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2017 INFINITI QX30
For the 2017 INFINITI QX30, the 5x114.3 bolt pattern and 66.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is tight: 40-50mm. Straying outside this can cause rubbing on suspension or fenders. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—either conical (60-degree) or ball seat, matching the wheel's design. Never mix seat types; this can lead to wheel loosening. Verify lug nut engagement: at least 7-8 full turns for safety.
Historical Fitment Data Reference
In our dataset, INFINITI QX30 appears from 2017 to 2019 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel settling.
- ✅ Avoid using universal fitment wheels without hub rings; they may cause vibration and stress on studs.
- ✅ Check brake caliper clearance when selecting wheels, as some aftermarket designs may interfere with the QX30's calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 INFINITI QX30 — Frequently Asked Questions
What is the bolt pattern for a 2017 INFINITI QX30?
The 2017 INFINITI QX30 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI QX30 have the same bolt pattern as the 2017?
The INFINITI QX30 uses the 5x114.3 pattern from 2017 through 2019. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
Can I use spacers on my 2017 INFINITI QX30?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the factory wheel offset for a 2017 INFINITI QX30?
The OEM offset for the 2017 QX30 is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2017 INFINITI QX30s use lug bolts or lug nuts?
The 2017 QX30 requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 40-50mm offset mean for the 2017 QX30?
An offset of 40-50mm means the wheel's mounting surface is 40-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset