2024 Fisker Ocean Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Fisker Ocean, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Ocean — Year-Specific Fitment Context
The 2024 is the only model year of the Fisker Ocean in our database using the 5x114.3 bolt pattern.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Fisker Ocean
The 2024 Fisker Ocean uses a 5x114.3 bolt pattern with a 66.1mm center bore. Aftermarket wheels often have a larger bore, so hub-centric rings (66.1mm ID to wheel bore OD) are essential to prevent vibration and ensure proper load distribution. The offset is sensitive; the factory spec is 40mm, but a range of 35-45mm is acceptable. Straying beyond this can cause rubbing or poor handling. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical/60-degree taper). Never use ball-seat lug nuts on conical-seat wheels, as this can lead to wheel loss. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Fisker Ocean appears from 2024 to 2024 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100-110 ft-lbs after 50-100 miles of driving to account for settling.
- ✅ Verify wheel bore is at least 66.1mm; if larger, use hub-centric rings to avoid vibration.
- ✅ Check offset carefully: 35-45mm is safe; lower offset may cause fender rubbing, higher may contact suspension.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Fisker Ocean — Frequently Asked Questions
What is the bolt pattern for a 2024 Fisker Ocean?
The 2024 Fisker Ocean uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
Can I put aftermarket wheels on my 2024 Fisker Ocean?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
What lug nut size does the 2024 Fisker Ocean use?
The 2024 Fisker Ocean uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2024 Fisker Ocean?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the PCD for a 2024 Fisker Ocean?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Ocean, the PCD is 5x114.3.
Do 2024 Fisker Oceans use lug bolts or lug nuts?
The 2024 Ocean requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset